abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Ability to fold cheqerplate

Ability to fold cheqerplate

Hi

 

I do a lot of staircases that require folded chequerplate, there is no option on the stair macro to use a folded chequerplate, or when a landing plate needs to be created for example of a half landing this will need an up or downturn, this cannot be created with the grating macro

 

You have to reply on advising the client that it has been modelled in plate, and chequer needs to be used, or amend all drawings, BOM etc to note as chequerplate, very laborious and will not appear in gratings list

 

I believe this request was put forward in 2016 and subsequently archived, surely lots of people would like this implemented

3 Kommentare
iwafb
Advisor

In the interim, you could use the remapping option by creating a special checker plate grade and remapping plates with this grade to checker plate.

 

https://knowledge.autodesk.com/community/article/53786

https://www.youtube.com/watch?v=3_S83kgjiiQ&list=PLY-ggSrSwbZr_DW0ssM7B20FqEvhoCnjq&index=7

 

Hope this helps.

AleckGiles
Advisor

Hi,

 

In the UK build there is already a material in the "Others" category for Durbar Plate. If you use this then for your folded plates (landings) or folded beams (treads) then all the BOMs will list the plate object as Durbar plate in the material / grade column and you don't have to rely on separately telling anyone. The only down side is that you cannot identify which side of the plate the dimples are on. If it is not obvious you might want to indicate that on the drawing manually.

Anonymous
Nicht anwendbar

Thanks Aleck

 

I didn't realise that was there, that will help

 

Chris

Can't find what you're looking for? Ask the community or share your knowledge.

Idee einsenden  

Autodesk Design & Make Report