Grid Behavior on Plan view vs Elevation view

[markhubrich]

I'm sure there's something I'm missing here regarding Grids on GA drawings.

On plan views when I don't want a specific grid line to be visible I assume I would uncheck the boxes and the grid will be gone. It doesn't work that way for me. I still see the line without the labels.

When doing the same in elevation view it works as I would expect and the line disappears. When I uncheck that box the entire grid line is not visible. Pretty much what I want in plan view also.

I cannot seem to find a difference between the 2 detail styles regarding the grids behavior. Does anyone know how I can fix this? It's been an issue for me for a while, just low on my "care to complain list" 😄 

Thanks,

Mark

[acbsdesign]

Turn off the grid in "representation type" on the left?

[markhubrich]

Hmm, 🙄 Yes that makes sense. The labels also need to be turned off. Then it leaves the line on the drawing but it appears to be on a no plot layer. Easier I suppose if I turn off a grid on accident then I can re enable it.  I also could just delete it. It does make me wonder though why elevation view and plan view act differently. 

In elevation if I turn off both labels it turns off the grid line too. It does not act this way in plan views though which would be more convenient 😄 If both labels are off there's no point in seeing the grid line.

Is this the way yours works too or did I just change something without being aware?

Thanks

Mark

[acbsdesign]

---

@markhubrich wrote:

Hmm, 🙄 Yes that makes sense. The labels also need to be turned off. Then it leaves the line on the drawing but it appears to be on a no plot layer. Easier I suppose if I turn off a grid on accident then I can re enable it.  I also could just delete it. It does make me wonder though why elevation view and plan view act differently. 

In elevation if I turn off both labels it turns off the grid line too. It does not act this way in plan views though which would be more convenient 😄 If both labels are off there's no point in seeing the grid line.

Is this the way yours works too or did I just change something without being aware?

Thanks

Mark

---

This is what my Apexx S3 is doing, 🙂, it is a little bit overworked and it is begging for a long 4th of July weekend:

1. In elevation view-turning Label turns off grid, but ONLY if I select the grid as there are more grid behind, by using press and drag, not just by clicking on the grid.

2. In plan view (and in elevation view)-turning off the grid leaves labels on, which is weird behaviour, I think.

Have a great evening.