Folded beams interior radius of bending

[spufut]

Hi! I was wandering if there is a way to set the folded beam radius of bend on the interior. 

As you can see in first picture, I set the radius at 2.7. For 2 and 3, it worked, the interior radius of bending is 2.7, but for 4 the radius is on the exterior. Do you know what can i do to get the 4 interior radius of bending at 2.7.

Thank you!

[mick-CNF · Accepted solution]

Hi @spufut 

Just add the thickness you are using to radius 4.

So in this case 4.7.

[spufut]

It worked, thank you so much!