Hi,
Is it possible for the drawing name to be the same as the part number.
For Example: p1001 is the part number. So I want the drawing name to be automated the same.
Thank you.
Solved! Go to Solution.
Solved by johnjmbennett. Go to Solution.
John Bennett
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
John Bennett
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
I am no expert in this area but I will help where I can. I'm sure @johnjmbennett will explain more clearly.
As john said in the previous post. This Is controlled by the file name selector - reference token, in the file name selector in the drawing process manager. You will have to modify the drawing name to include Part No.
There are a few threads on this forum which you might find useful.
Hope that helps.
John Bennett
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Thanks for your help.
This is what I got before. Is there anything I missed?
John Bennett
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
This video by kirk should help, around 6 minutes on, there are also other videos you will see related to this on you tube.
Can't find what you're looking for? Ask the community or share your knowledge.