pls see attached..
I have a metal part for which i have added a raised area which needs to be shelled out so as to replicate a dish shape.
1. Can this be shelled out and filleted so as to represent a smooth pressed raised section in the metal
I don`t know of any other way to perform this feature.
Solved! Go to Solution.
You should use a Punch tool if you still want this to give you a Flat Pattern
you could add the fillets and them shell (select all faces extcept the front (or back) faces.
If you were going to shell - there was an easier way to create the part.
1. If you were going to shell - there was an easier way to create the part....could you please post a sample
2. How would i use the punch tool...are these already available....could you post a sample
Simply place a sketch on the face with a "Center-Mark" at the center your desired "punch" location. Then select the Punch-Tool, scroll down to the desired shape.
Please remember, unless you see "Autodesk Employee" attached to the user name, everyone else is doing this out of the goodness of their heart.
Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register
Start with some of our most frequented solutions to get help installing your software.