Inventor General

Reply
New Member
Posts: 2
Registered: ‎02-08-2013
Message 1 of 7 (295 Views)

Need help on inventor

295 Views, 6 Replies
02-08-2013 12:04 PM

I have little experience with inventor and need some help with a certain problem. I am construcing a skateboard truck and would like to know how to change the angle of the circle face in the first picture to be at the same angle of the face in the second picture. The highlighted areas have been coloured gold.  I have attached the ipt file below. 

*Expert Elite*
Posts: 25,269
Registered: ‎04-20-2006
Message 2 of 7 (291 Views)

Re: Need help on inventor

02-08-2013 12:11 PM in reply to: andrew0412

I notice that your Sketch1 is not constrained.

I recommend you read this

http://home.pct.edu/~jmather/SkillsUSA%20University.pdf

 

Beginners should almost never use Delete Face -

you have a solid body and a surface body.

 

I recommend you start over using what you learned from the first attempt to simplify the second attempt (should be able to cut the number of features in half and don't use Delete Face.

 

Attach here at any step where you have difficulty in the new attempt.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2014 Edu 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
New Member
Posts: 2
Registered: ‎02-08-2013
Message 3 of 7 (271 Views)

Re: Need help on inventor

02-08-2013 02:10 PM in reply to: JDMather

Thanks I'll try that.

*Expert Elite*
Posts: 25,269
Registered: ‎04-20-2006
Message 4 of 7 (251 Views)

Re: Need help on inventor

02-09-2013 07:58 AM in reply to: andrew0412

Well I wouldn't mark as a solution until you get the final results.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2014 Edu 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
New Member
Posts: 1
Registered: ‎02-26-2013
Message 5 of 7 (184 Views)

Re: Need help on inventor

02-26-2013 10:01 AM in reply to: JDMather

i need help on making a skateboard truck(axle) on inventor. i have tried everything. will someone please help give directions on making this difficult task.

*Expert Elite*
Posts: 1,020
Registered: ‎09-03-2008
Message 6 of 7 (175 Views)

Re: Need help on inventor

02-26-2013 10:34 AM in reply to: Packers4life23

Since this thread has been marked as solved, you might not get the help you need.  You should create a new thread and post your questions there.

*Expert Elite*
Posts: 25,269
Registered: ‎04-20-2006
Message 7 of 7 (167 Views)

Re: Need help on inventor

02-26-2013 10:57 AM in reply to: Packers4life23

Attach your latest effort on the ipt file here.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2014 Edu 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Welcome to the new Autodesk Community!
If this is your first visit, click here to get started and make the most of the Community. Let us know what you think of the new experience in the Community Feedback Forum.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Inventor Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Autodesk Inventor helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Inventor

Twitter

Facebook

Blogs

Pinterest

Youtube