Community
Inventor Forum
Welcome to Autodesk’s Inventor Forums. Share your knowledge, ask questions, and explore popular Inventor topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Collision Detection And Drive Constraints

7 REPLIES 7
Reply
Message 1 of 8
412and118
1054 Views, 7 Replies

Collision Detection And Drive Constraints

Hi

 

   Assemble several parts from Solidworks  through step profile.Part2 and part3(attachments) no static interference ,when driving constraints (driver) immediately a collision report appears.Additional,when restrain the part 3(attachments)and drive constraint(driver) meanwhile open the collision detection ,finally,part2(attachments) goes through the barrier no checking collision.

 

   Thanks in advance.

   

Tags (1)
7 REPLIES 7
Message 2 of 8
CCarreiras
in reply to: 412and118

Hi!

 

What?!!

 

Try to attach the files here.

 

Did you find this reply helpful ? If so, use the  Mark Solutions!  Accept as Solution or Give Kudos!Kudos - Thank you!



Regards.
CCarreiras
Message 3 of 8
mcgyvr
in reply to: CCarreiras

Doodle foodle schmoodle oobly bo do ti ta flakn smackn.. (attached) Smiley Very Happy

 



-------------------------------------------------------------------------------------------
Inventor 2023 - Dell Precision 5570

Did you find this reply helpful ? If so please use the Accept Solution button below.
Maybe buy me a beer through Venmo @mcgyvr1269
Message 4 of 8
gsmith9810
in reply to: 412and118

It sounds like you need to better understand the use of CONTACT SETS. It is also possible that the imported models have fasteners with an OD greater than the modeled ID of the threaded hole. This condition used to produce an immediate interference report.
-------------------------------------------------------
Gary Smith
Inventor Product Design Suite 2013sp2
Windows 7sp1 64-bit
nVidia Quadro 2000
Message 5 of 8
412and118
in reply to: 412and118

Hi!

thanks!

Message 6 of 8
412and118
in reply to: 412and118

 
Message 7 of 8
412and118
in reply to: gsmith9810

Thanks! I will try again!

Message 8 of 8
412and118
in reply to: gsmith9810

Hi! 

sometimes, it moves for a while then produces a report! Additional,it's not contact sets!

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report