Installation & Licensing

Reply
Member
Posts: 5
Registered: ‎04-21-2012
Message 1 of 10 (3,803 Views)
Accepted Solution

Revit 2013 Install Hangs

3803 Views, 9 Replies
04-21-2012 06:02 PM

I am trying to install Revit 2013 on a windows 7 machine that meets all the requirements, I have updated everything, and stopped the antivirus, but the install still hangs.

 

I have attached the install log and would appreciate help with suggestions. Thanks.

 

*Expert Elite*
TravisNave
Posts: 9,522
Registered: ‎01-14-2005
Message 2 of 10 (3,778 Views)

Re: Revit 2013 Install Hangs

04-22-2012 10:15 AM in reply to: dannelson2000

Have you tried just waiting it out? 

Travis Nave Send TravisNave a Private Message                       Need help in your post? Mention me with @TravisNave
Member
Posts: 5
Registered: ‎04-21-2012
Message 3 of 10 (3,772 Views)

Re: Revit 2013 Install Hangs

04-22-2012 01:43 PM in reply to: TravisNave

I have let it run probablly about 3 hours. I would expect that it should install within that time.

 

Does what you see in the log file suggest that it is still going but is just slow?

 

 

*Expert Elite*
TravisNave
Posts: 9,522
Registered: ‎01-14-2005
Message 4 of 10 (3,770 Views)

Re: Revit 2013 Install Hangs

04-22-2012 01:48 PM in reply to: dannelson2000

I've seen it go twice as long as that sometimes.  Try letting it run overnight just as a test.  If it isn't installed in the morning, you have issues.  :-D

Travis Nave Send TravisNave a Private Message                       Need help in your post? Mention me with @TravisNave
Active Member
Posts: 6
Registered: ‎04-23-2012
Message 5 of 10 (3,739 Views)

Re: Revit 2013 Install Hangs

04-23-2012 06:57 AM in reply to: dannelson2000

Hi there,I've had this issue and this is what i did, First make sure you have internet access and that the Proxy is set correctly (If you use a proxy server try giving the machine full outbound) and try to run the install with an admin account.

 

Member
Posts: 5
Registered: ‎04-21-2012
Message 6 of 10 (3,703 Views)

Re: Revit 2013 Install Hangs

04-23-2012 10:19 PM in reply to: TravisNave

I ran it over night and it was installed by morning. Phew!

 

Thanks for your help!

Active Member
gpktm
Posts: 12
Registered: ‎10-06-2011
Message 7 of 10 (3,576 Views)

Re: Revit 2013 Install Hangs

04-27-2012 07:08 PM in reply to: dannelson2000

So the solution is what? To wait for 8 hours to install a program?

Member
Posts: 5
Registered: ‎04-21-2012
Message 8 of 10 (3,573 Views)

Re: Revit 2013 Install Hangs

04-27-2012 09:37 PM in reply to: gpktm

In my case yes.

*Expert Elite*
TravisNave
Posts: 9,522
Registered: ‎01-14-2005
Message 9 of 10 (3,571 Views)

Re: Revit 2013 Install Hangs

04-27-2012 09:46 PM in reply to: dannelson2000

Good answer.  :smileyvery-happy:

Travis Nave Send TravisNave a Private Message                       Need help in your post? Mention me with @TravisNave
New Member
Posts: 1
Registered: ‎03-15-2014
Message 10 of 10 (147 Views)

revit 2013 - how to fix the tool" mode"

03-15-2014 06:44 AM in reply to: dannelson2000

well,I also has the pronlem with revit 2013.

when I click " extrusion" and finish drawing a square, it doest show any hint in the tool bar as" MODE",which has the tick meaning OK.!!

Just hope someone can help me fix.....thx a lot

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Welcome to the new Autodesk Community!
If this is your first visit, click here to get started and make the most of the Community. Let us know what you think of the new experience in the Community Feedback Forum.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community




Connect with Us

Twitter

Pinterest

Blog

Youtube