Autodesk Architectural Desktop 2007 & Prior

Reply
*Addis, Reid M.
Message 11 of 16 (15 Views)

Re:

01-03-2001 12:01 PM in reply to: *Dougan, Larry
You guys all need to update to this new fangled thing I have: a parallel
edge!

--
Regards
----------------------
Reid M. Addis / Addis Computer Consultants
phone: 1-800-841-4418 fax: 1-610-668-8828
web site: http://www.addiscomputer.com
e-mail: raddis@addiscomputer.com
"Mike Maloney" wrote in message
news:3A53B47C.BEED1710@pcfl.net...
> Yes Fitz,
>
> as a matter of fact, I still have mine.
>
> Mike Maloney
>
> "William Fitzpatrick[Autodesk]" wrote:
>
> > Sorry, but there ARE loads of "whizbang-gizmos" in this software. And
you
> > have to remember that I began drafting with a T-square.
> >
> > Anybody here ever seen one?
> >
> > Fitz
> >
> > "Dustin Hutsell" wrote in message
> > news:BA6DE2CDA1D4CD2028455E829848DEFE@in.WebX.SaUCah8kaAW...
> > > Its nice to see AutoDesk using their in house technical terms with the
> > > customers. I know it makes me feel like I'm on the inside loop. :smileyhappy:
> > >
> > >
> > > As of yet there is no Trim gizmo.
> > >
> > >
> > > Sorry William I just couldn't resist!
> > >
> > > Dustin Hutsell
> > >
>
*DRF
Message 12 of 16 (15 Views)

Re:

01-03-2001 08:59 PM in reply to: *Dougan, Larry
Parallel edge???? Is that a new ADT3 command?

:smileyhappy:

"Reid M. Addis" wrote in message
news:299CDB1792F00E3944B56B85E17336EB@in.WebX.SaUCah8kaAW...
> You guys all need to update to this new fangled thing I have: a parallel
> edge!
>
> --
> Regards
> ----------------------
> Reid M. Addis / Addis Computer Consultants
> phone: 1-800-841-4418 fax: 1-610-668-8828
> web site: http://www.addiscomputer.com
> e-mail: raddis@addiscomputer.com
> "Mike Maloney" wrote in message
> news:3A53B47C.BEED1710@pcfl.net...
> > Yes Fitz,
> >
> > as a matter of fact, I still have mine.
> >
> > Mike Maloney
> >
> > "William Fitzpatrick[Autodesk]" wrote:
> >
> > > Sorry, but there ARE loads of "whizbang-gizmos" in this software. And
> you
> > > have to remember that I began drafting with a T-square.
> > >
> > > Anybody here ever seen one?
> > >
> > > Fitz
> > >
> > > "Dustin Hutsell" wrote in message
> > > news:BA6DE2CDA1D4CD2028455E829848DEFE@in.WebX.SaUCah8kaAW...
> > > > Its nice to see AutoDesk using their in house technical terms with
the
> > > > customers. I know it makes me feel like I'm on the inside loop. :smileyhappy:
> > > >
> > > >
> > > > As of yet there is no Trim gizmo.
> > > >
> > > >
> > > > Sorry William I just couldn't resist!
> > > >
> > > > Dustin Hutsell
> > > >
> >
>
*McNeal, Dennis
Message 13 of 16 (15 Views)

Re:

01-03-2001 09:13 PM in reply to: *Dougan, Larry
Fitz,
I got rid of mine when the 'Undo' button broke :-)

Dennis McNeal
Architectural Resources

William Fitzpatrick[Autodesk] wrote in message ...
>Sorry, but there ARE loads of "whizbang-gizmos" in this software. And you
>have to remember that I began drafting with a T-square.
>
>Anybody here ever seen one?
>
>Fitz
>
>"Dustin Hutsell" wrote in message
>news:BA6DE2CDA1D4CD2028455E829848DEFE@in.WebX.SaUCah8kaAW...
>> Its nice to see AutoDesk using their in house technical terms with the
>> customers. I know it makes me feel like I'm on the inside loop. :smileyhappy:
>>
>>
>> As of yet there is no Trim gizmo.
>>
>>
>> Sorry William I just couldn't resist!
>>
>> Dustin Hutsell
>>
>
*Abernethy, Bob
Message 14 of 16 (15 Views)

Re:

01-03-2001 10:33 PM in reply to: *Dougan, Larry
I've still got my dad's that I used in HS .... it must be around 70 (or so)
years old.

Also still have my Hamilton electric board and Vemco V-Track

Anyone want to purchase either/both, not the "T"

> William Fitzpatrick[Autodesk] wrote in message ...
> >Sorry, but there ARE loads of "whizbang-gizmos" in this software. And you
> >have to remember that I began drafting with a T-square.
> >
> >Anybody here ever seen one?
> >
> >Fitz
*Thad A. Broom, AIA
Message 15 of 16 (15 Views)

Re:

01-03-2001 11:00 PM in reply to: *Dougan, Larry
I not only have my old Tsquare but also my old slide rule. One of these
daays the lights are going to go out but I'll be prepared.

Thad Broom, AIA
"Tom Fletcher" wrote in message
news:5424493DC698B20DA5639E259F29CB75@in.WebX.SaUCah8kaAW...
> Still got mine!
>
> William Fitzpatrick[Autodesk] wrote in
> message news:B9EB3A2965D8EA9883BC7C31CD3AC83A@in.WebX.SaUCah8kaAW...
> > Sorry, but there ARE loads of "whizbang-gizmos" in this software. And
you
> > have to remember that I began drafting with a T-square.
> >
> > Anybody here ever seen one?
> >
> > Fitz
> >
> > "Dustin Hutsell" wrote in message
> > news:BA6DE2CDA1D4CD2028455E829848DEFE@in.WebX.SaUCah8kaAW...
> > > Its nice to see AutoDesk using their in house technical terms with the
> > > customers. I know it makes me feel like I'm on the inside loop. :smileyhappy:
> > >
> > >
> > > As of yet there is no Trim gizmo.
> > >
> > >
> > > Sorry William I just couldn't resist!
> > >
> > > Dustin Hutsell
> > >
> >
>
Active Member
Posts: 8
Registered: ‎01-08-2001
Message 16 of 16 (15 Views)

Re:

01-04-2001 04:52 AM in reply to: *Dougan, Larry
I still have mine hanging on the wall... with a note...
"In case of computer frustration... You could uses this"
No thanks... keeps me focused... no matter how bad I think it is...

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Welcome to the new Autodesk Community!
If this is your first visit, click here to get started and make the most of the Community. Let us know what you think of the new experience in the Community Feedback Forum.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community