Building Systems 3 OE setup error.

[Anonymous]

Hi folks,
I've started recieving drawings from a consultant made using Autodesk
Building Systems 3. We're trying to open them in ADT3.3 SP2 and it ain't
happening.

So, I attempted to install the OE for ABS3 and I get the following error
message...

"Autodesk Building Systems 3 Object Enabler is not compatible with the
version of AEC ObjectDBX currently installed on this machine.

Please remove any older Object Enablers or update installed products."


The problem is that I did just that and removed an OE that was installed and
also made sure sp2 was installed. AutoCAD 14 had also been installed on that
computer so I removed that to be safe. Still no luck. It won't even allow me
to re-install the OE that had been on there before.

Thanks for your input,
Jim Bednarz
IT Administrator/ CAD manager

[Anonymous]

Did you happen to have Adt2i on the machine at one point?

James Bednarz wrote:

> Hi folks,
> I've started recieving drawings from a consultant made using Autodesk
> Building Systems 3. We're trying to open them in ADT3.3 SP2 and it ain't
> happening.
>
> So, I attempted to install the OE for ABS3 and I get the following error
> message...
>
> "Autodesk Building Systems 3 Object Enabler is not compatible with the
> version of AEC ObjectDBX currently installed on this machine.
>
> Please remove any older Object Enablers or update installed products."
>
> The problem is that I did just that and removed an OE that was installed and
> also made sure sp2 was installed. AutoCAD 14 had also been installed on that
> computer so I removed that to be safe. Still no luck. It won't even allow me
> to re-install the OE that had been on there before.
>
> Thanks for your input,
> Jim Bednarz
> IT Administrator/ CAD manager

[Anonymous]

No, I don't think so.


"Mike Hutchinson" wrote in message
news:3EF1F88B.E045334B@bbsae.com...
> Did you happen to have Adt2i on the machine at one point?
>
> James Bednarz wrote:
>
> > Hi folks,
> > I've started recieving drawings from a consultant made using
Autodesk
> > Building Systems 3. We're trying to open them in ADT3.3 SP2 and it ain't
> > happening.
> >
> > So, I attempted to install the OE for ABS3 and I get the following
error
> > message...
> >
> > "Autodesk Building Systems 3 Object Enabler is not compatible with the
> > version of AEC ObjectDBX currently installed on this machine.
> >
> > Please remove any older Object Enablers or update installed products."
> >
> > The problem is that I did just that and removed an OE that was installed
and
> > also made sure sp2 was installed. AutoCAD 14 had also been installed on
that
> > computer so I removed that to be safe. Still no luck. It won't even
allow me
> > to re-install the OE that had been on there before.
> >
> > Thanks for your input,
> > Jim Bednarz
> > IT Administrator/ CAD manager
>