Autodesk Architectural Desktop 2007 & Prior

Reply
*Bednarz, James
Message 1 of 3 (30 Views)

Building Systems 3 OE setup error.

30 Views, 2 Replies
06-18-2003 11:31 PM
Hi folks,
I've started recieving drawings from a consultant made using Autodesk
Building Systems 3. We're trying to open them in ADT3.3 SP2 and it ain't
happening.

So, I attempted to install the OE for ABS3 and I get the following error
message...

"Autodesk Building Systems 3 Object Enabler is not compatible with the
version of AEC ObjectDBX currently installed on this machine.

Please remove any older Object Enablers or update installed products."


The problem is that I did just that and removed an OE that was installed and
also made sure sp2 was installed. AutoCAD 14 had also been installed on that
computer so I removed that to be safe. Still no luck. It won't even allow me
to re-install the OE that had been on there before.

Thanks for your input,
Jim Bednarz
IT Administrator/ CAD manager
*Hutchinson, Mike
Message 2 of 3 (30 Views)

Re: Building Systems 3 OE setup error.

06-19-2003 02:53 AM in reply to: *Bednarz, James
Did you happen to have Adt2i on the machine at one point?

James Bednarz wrote:

> Hi folks,
> I've started recieving drawings from a consultant made using Autodesk
> Building Systems 3. We're trying to open them in ADT3.3 SP2 and it ain't
> happening.
>
> So, I attempted to install the OE for ABS3 and I get the following error
> message...
>
> "Autodesk Building Systems 3 Object Enabler is not compatible with the
> version of AEC ObjectDBX currently installed on this machine.
>
> Please remove any older Object Enablers or update installed products."
>
> The problem is that I did just that and removed an OE that was installed and
> also made sure sp2 was installed. AutoCAD 14 had also been installed on that
> computer so I removed that to be safe. Still no luck. It won't even allow me
> to re-install the OE that had been on there before.
>
> Thanks for your input,
> Jim Bednarz
> IT Administrator/ CAD manager
*Bednarz, James
Message 3 of 3 (30 Views)

Re:

06-23-2003 10:56 PM in reply to: *Bednarz, James
No, I don't think so.


"Mike Hutchinson" wrote in message
news:3EF1F88B.E045334B@bbsae.com...
> Did you happen to have Adt2i on the machine at one point?
>
> James Bednarz wrote:
>
> > Hi folks,
> > I've started recieving drawings from a consultant made using
Autodesk
> > Building Systems 3. We're trying to open them in ADT3.3 SP2 and it ain't
> > happening.
> >
> > So, I attempted to install the OE for ABS3 and I get the following
error
> > message...
> >
> > "Autodesk Building Systems 3 Object Enabler is not compatible with the
> > version of AEC ObjectDBX currently installed on this machine.
> >
> > Please remove any older Object Enablers or update installed products."
> >
> > The problem is that I did just that and removed an OE that was installed
and
> > also made sure sp2 was installed. AutoCAD 14 had also been installed on
that
> > computer so I removed that to be safe. Still no luck. It won't even
allow me
> > to re-install the OE that had been on there before.
> >
> > Thanks for your input,
> > Jim Bednarz
> > IT Administrator/ CAD manager
>

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you interested in helping shape the Autodesk Community?
We’re looking at a few different ways to improve the “All Forums” landing page and need your feedback! If interested, please take a few minutes to fill out the following Usability Study. Thank you for your time!

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community