AutoCAD Map 3D General

Reply
Active Member
Posts: 6
Registered: ‎08-31-2009
Message 1 of 10 (334 Views)

Local license vs network license

334 Views, 9 Replies
01-23-2013 05:59 AM

We want to check and be sure that our licenses are correct for our company.

 

We have discovered that some of our HKLM\Software\Autodesk\Serialnumber is marked as 000-00000000 which might be considered as trial? At the same time, if we go to Help > About it shows the correct serial as shared from our FlexLM licenses.The key StandaloneNetworkType is set to 3 which should be Network License mode. Also, sometimes is StandaloneNetworkType set to '0'. So I am not sure what is safe here.

 

Can anybody inform us about how we ensure that our setup is legal?

*Expert Elite*
DarrenP
Posts: 6,815
Registered: ‎09-13-2007
Message 2 of 10 (325 Views)

Re: Local license vs network license

01-23-2013 06:04 AM in reply to: HAL0

only way to check is to verify your serial numbers with your reseller

thats the easiest

Active Member
Posts: 6
Registered: ‎08-31-2009
Message 3 of 10 (323 Views)

Re: Local license vs network license

01-23-2013 06:11 AM in reply to: DarrenP

well checking our install and distribution method might be a long process so I hoped for some help here.

*Expert Elite*
DarrenP
Posts: 6,815
Registered: ‎09-13-2007
Message 4 of 10 (317 Views)

Re: Local license vs network license

01-23-2013 06:16 AM in reply to: HAL0

what exactly are you trying to determine?

seat count?

serial number?

products & versions?

Active Member
Posts: 6
Registered: ‎08-31-2009
Message 5 of 10 (315 Views)

Re: Local license vs network license

01-23-2013 06:18 AM in reply to: DarrenP

im trying to ask if its legal to have a local registry 000-00000000 as long as help > about shows the correct serial and you are licensed.

*Expert Elite*
DarrenP
Posts: 6,815
Registered: ‎09-13-2007
Message 6 of 10 (312 Views)

Re: Local license vs network license

01-23-2013 06:21 AM in reply to: HAL0

as along as the product has the correct serial number you should be fine

Active Member
Posts: 6
Registered: ‎08-31-2009
Message 7 of 10 (310 Views)

Re: Local license vs network license

01-23-2013 06:23 AM in reply to: DarrenP

thanks. do you know if its legal to use older serials locally? we have older products like 2011-products (we are allowed to use 2010-2013 products in our license). can we use serials from 2011 locally or do we have to replace them?

*Expert Elite*
DarrenP
Posts: 6,815
Registered: ‎09-13-2007
Message 8 of 10 (305 Views)

Re: Local license vs network license

01-23-2013 06:25 AM in reply to: HAL0

you use the 2011 serial number

as along as you aren't exceding the number of license as you own

Active Member
Posts: 6
Registered: ‎08-31-2009
Message 9 of 10 (296 Views)

Re: Local license vs network license

01-23-2013 07:03 AM in reply to: DarrenP

thanks. well reading about this seems not so easy as you type here... when companies like http://www.scottandscottllp.com/main/Preventative_Step_to_Reduce_Exposure.aspx seem to specialize in this

 

have you ever been involved in a autodesk license revision of a company?

*Expert Elite*
DarrenP
Posts: 6,815
Registered: ‎09-13-2007
Message 10 of 10 (288 Views)

Re: Local license vs network license

01-23-2013 09:00 AM in reply to: HAL0

no i have not

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Welcome to the new Autodesk Community!
If this is your first visit, click here to get started and make the most of the Community. Let us know what you think of the new experience in the Community Feedback Forum.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community