Error AutoCAD Electrical 2013 - Reports cable from/to

[facundo.bergui]

I am trying to generate wire from2 report and i am getting this error.. cananyboy help me out..

------------------------------------------------------------------------------------------------------------------------------------------------------------- 

Cable From/To Report

 reading project database file . . .

 Data written out to project database table "WFRM2ALL" and "WNETLST"

 reading project database file . . .

No data to display

------------------------------------------------------------------------------------------------------------------------------------------------------------- 

Facundo

===============================================================================

Hola, estoy tratando de realizar un reporte de cables desde/hasta y me aparece el siguiente error. Agradecere cualquier respuesta.

------------------------------------------------------------------------------------------------------------------------------------------------------------- 

Cable From/To Report

 reading project database file . . .

 Data written out to project database table "WFRM2ALL" and "WNETLST"

 reading project database file . . .

No data to display

------------------------------------------------------------------------------------------------------------------------------------------------------------- 

Facundo

[drathak]

It would appear that you have no cable markers in your project.  I presume that is not the case, or you wouldn't see that response as an error. 

Can you post a drawing or two that have the cables in them so we can check it out?

[jdenny]

When I get errors like that, the 3 things that are usually the culprit are:

1) I do not have the appropriate type of data to be shown in that type of report

2) I selected the wrong dwg(s) to "process"

3) The project I am trying to report on is not the "active" dwg.

Simple stuff, but might be one of those.

[facundo.bergui]

Dear Joe, here attached a picture:

Estimado Joe, aqui adjunto una imagen:

Regards

Saludos

--------------
Facundo Bergui
Thechnician
IMPSA

www.impsa.com

[drathak]

Actually I meant post a couple of the drawings which have cable markers in them.  Not images but the actual DWG files so others can try to reproduce your error.