Mentor
Posts: 158
Registered: ‎09-05-2007
Message 1 of 6 (254 Views)

# Tin Volume Surface

254 Views, 5 Replies
02-22-2013 01:32 PM

Can anyone explain for me the idea behind Tin Volume Surface?

I have a pit/hole as base surface and the existing ground on the top is the comparison surface.

I want to calculate the volume of the hole (or the fill).

Using the Volume Utilities I got the result.

But what is the use of Tin Volume Surface?

*Expert Elite*
Posts: 8,045
Registered: ‎06-29-2007
Message 2 of 6 (249 Views)

# Re: Tin Volume Surface

02-22-2013 01:42 PM in reply to: teflon

Hi,

>> But what is the use of Tin Volume Surface?

For displaying analyses,

E.g. to colorize where surface1 is above surface2 and where lower + the amount of higher and lower. Create a surfacestyle with elevation analyses and that's it.

Or to know where is the exact position of the edge when surface1 cuts through surface2 ==> it's the contour line for elevation 0.00 in the volume surface.

- alfred -

-------------------------------------------------------------------------
Ingenieur Studio HOLLAUS ... www.hollaus.at
-------------------------------------------------------------------------
Mentor
Posts: 158
Registered: ‎09-05-2007
Message 3 of 6 (232 Views)

# Re: Tin Volume Surface

Thanks!

But the resulting object is just a flat surface and not a volume or a "solid" representing amount of the "earthwork"!

My understanding was that the two surfaces were like the shell and the Tin Volume then would be the core.

Tin volume Surface is just a color scheme in 2D!

Am I correct?

*Expert Elite*
Posts: 8,045
Registered: ‎06-29-2007
Message 4 of 6 (230 Views)

# Re: Tin Volume Surface

02-22-2013 02:15 PM in reply to: teflon

Hi,

>> the Tin Volume then would be the core

Yes and no, it represents the core, but not at it's elevation.

E.g. if the first/top surface is a flat surface at 1000m and the second/lower surface is a flat surface at 900m then the volume-surface is a surface from 0 to -100.

>> Tin volume Surface is just a color scheme in 2D!

The representation of this surface depends (as everything in Civil3D) on it's style. If you look to this surface from a perspective view and you have set the style to show the triangles in model-view then you should see it 3-dimensional.

You might see it only 2D if you show just analyses data and that like 2D-solids as example.

HTH, - alfred -

-------------------------------------------------------------------------
Ingenieur Studio HOLLAUS ... www.hollaus.at
-------------------------------------------------------------------------
*Expert Elite*
Posts: 3,416
Registered: ‎08-01-2008
Message 5 of 6 (214 Views)

# Re: Tin Volume Surface

02-22-2013 03:01 PM in reply to: teflon
they can be used in conjunction with the volumes dashboard to spilt an earthworks job into several phases to analyse the cut and fill in each phase as well as for creating sub surface geology surfaces
neilyj
(No connection with Autodesk other than using the products in the real world)

IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
*Expert Elite*
Posts: 4,365
Registered: ‎12-15-2008
Message 6 of 6 (205 Views)

# Re: Tin Volume Surface

02-22-2013 03:13 PM in reply to: teflon

teflon wrote:

Can anyone explain for me the idea behind Tin Volume Surface?

I have a pit/hole as base surface and the existing ground on the top is the comparison surface.

I want to calculate the volume of the hole (or the fill).

Using the Volume Utilities I got the result.

But what is the use of Tin Volume Surface?

aside from the graphical representations available , I think you answered your own question

Thank you

Joseph D. Bouza, P.E. (one of 'THOSE' People) Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram

Note: Its all Resistentialism, so keep calm and carry on

64 Bit Win7 OS

Recently Solved