Community
Civil 3D Forum
Welcome to Autodesk’s Civil 3D Forums. Share your knowledge, ask questions, and explore popular AutoCAD Civil 3D topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Assign elevation to Cogo points by snapping to 3D entities

2 REPLIES 2
SOLVED
Reply
Message 1 of 3
rkmcswain
1066 Views, 2 Replies

Assign elevation to Cogo points by snapping to 3D entities

Can you manually create a new cogo point and have it pick up the elevation from a 3D entity that you snap to?

 

I found this thread from 2010 that says no at that time.

http://forums.autodesk.com/t5/AutoCAD-Civil-3D/Create-points-with-auto-elevation-by-snapping-to-3D-o...

 

Is this still not possible with C3D 2013?

 

R.K. McSwain     | CADpanacea | on twitter
2 REPLIES 2
Message 2 of 3
Jay_B
in reply to: rkmcswain

Works here in 2012 c3d. This is  a 3d poly and all shown elev.'s were derived from snapping to the 3d poly.

 

snap.PNG

C3D 2018.1
C3D 2016 SP4

Win 7 Professional 64 Bit
Message 3 of 3
rkmcswain
in reply to: Jay_B

You're right.

Tried in a new empty drawing, with "Prompt for Elevations" set to Manual.

I failed rule #1 -> always try it in a new empty drawing.... 😞

R.K. McSwain     | CADpanacea | on twitter

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Rail Community


Autodesk Design & Make Report