i know how to insert title block in a layout tab. i want the title block to be the same block in all the tabs i am using. if i have 10 tabs i would like each layout tab to have the same title block. i will also need properties to where i change the date on the cover sheet, all layout tabs will be changed at the same time.
this also needs to be 1 file and not a base file and xref.
can someone please help.
i know this works because i am working in autocad where it is implemented. this was done by an individual before i started at this job.
Hello from France
Insert your Block (Title Block in fact) at 0,0 in each Layout for example ...
And use Fields (Insert / Fileds with the Classic Interface) to fill up the Date, the Revision, etc
Fields will come from DWGPROPS where you will add your own fields/columns in the "Personnalized" Tab
So you add : MYDATE, MYREVISION, etc
And then you will Insert these FIleds in your TItle Blocks ...
If you change something with the DWGPROPS command ...
Then REGEN (or RG) and ALL Fileds are immediately updated (in every Layout) ...
Sorry for my poor US/English, do you undestand what I mean ?
Hello from Belgium (from an Englishman).
Your English is very clear, just a tip, if you click on the "options" to the top right of your post there is an option to edit your post. This is only available for your own posts, but can be very handy when you spot errors, or want to add something.
Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register
Start with some of our most frequented solutions to get help installing your software.