AutoCAD 2000/2000i/2002 Archive (Read Only)
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Wipeouts from Autcad 2013 to Autocad 2000 problems

1 REPLY 1
Reply
Message 1 of 2
jarredmonday
1286 Views, 1 Reply

Wipeouts from Autcad 2013 to Autocad 2000 problems

Hello,

 

I have created multiple dynamic blocks in Autocad 2013 and when I save down to 2000 our customer will open their drawing in Autocad 2000 and the wipeouts inside the dynamic blocks are not hiding anything. But when I open the same file sent to them in our Autocad 2000 we are not seeing any issues with any objects not hiding. I am aware of the dynamic properties being stripped after down after saving, Could there be a setting or switch?

 

Attached is my dynamic block. Are there any suggestions on what this could be?

Please mark Accept as Solution if your question is answered. Kudos gladly accepted. ⇘
1 REPLY 1
Message 2 of 2
pendean
in reply to: jarredmonday

WIPEOUT in R2000 was a Express Tool: you have that loaded, but they don't nost likely.

Nothing you can do about it in R2013 or your R2000.

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report