AutoCAD 2000/2000i/2002 Archive

New Member
Posts: 1
Registered: ‎10-24-2012
Message 1 of 2 (1,360 Views)

Fatal Error: Unhandled Access Violation Reading 0x0004 Exception at 3092ce3eh

1360 Views, 1 Replies
10-24-2012 08:34 AM

Our computer running AutoCad 2000i recently had to be restored from a hard drive image to another computer. AutoCad 2000i will not startup with the new setup. AutoCad R14 starts fine, with no problems. However, when I startup 2000i, I get the error:: "Fatal Error: Unhandled Access Violation Reading 0x0004 Exception at 3092ce3eh" immediately after Loading VBA startup file displays at the bottom.


I tried disabling Graphics Acceleration, as was suggested in other posts, but that did nothing. I attempted to start in safe mode w/ networking, but I get an error saying "Network: Network Driver appears to not be serving this directory".


The setup is on Windows XP SP3, Pentium Core2Duo 1.86ghz, 2 gb RAM, 80 gb HD, Intel Q965/Q963 integrated Graphics.


Thanks in advance for any help!

*Expert Elite*
Posts: 20,220
Registered: ‎11-06-2003
Message 2 of 2 (1,351 Views)

Re: Fatal Error: Unhandled Access Violation Reading 0x0004 Exception at 3092ce3e

10-25-2012 06:00 AM in reply to: Blockhouse

remove and reinstall 2000i yet? Ensure it is fully updated afterwards too.

Dean Saadallah Blog | Facebook | Google+ | Twitter | PINS

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Welcome to the new Autodesk Community!
If this is your first visit, click here to get started and make the most of the Community. Let us know what you think of the new experience in the Community Feedback Forum.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community

Connect with AutoCAD