topic Re: Drainage Program in Visual LISP, AutoLISP and General Customization Forum

Drainage Program

_Tharwat — Thu, 16 Jul 2020 10:33:30 GMT

My Dynamic Drainage program release: 5.1.2 that uses Imperial scale along with 3 scales in metric system, you can download the program from Autodesk Apps. Store or from my website as follows:

https://autolispprograms.wordpress.com/one/drainage-pipe/

Re: Drainage Program

john.uhden — Sat, 18 Jul 2020 02:08:58 GMT

What kind of drainage pipe are you designing?

Here in New Jersey, junctions and changes in direction require a manhole or inlet structure, not a TY.

Re: Drainage Program

_Tharwat — Sat, 18 Jul 2020 06:07:33 GMT

Hello John,

Yes the manhole should be used in lieu of TY in the external network and in basement floors but in the internal connections the clean out and TY should be used based on the situation.

The program designed to work with uPVC Terrain and Cosmoplast pipes and fittings and this is the most general types used over the world although, generally lots of users use this program for the Drainage system regardless of the forms of the pipes & fittings but with concentration on the routes and right connections.

Re: Drainage Program

Sea-Haven — Sun, 19 Jul 2020 11:06:05 GMT

The definition here of what is "drainage" may help, I thinks it more options 1 and 2 below, I am sure Tharwat will confirm.

Household / Building internal drainage systems upvc mainly

Household / Building internal Sewer drainage systems upvc mainly

Storm water Buildings

Storm water streets

Here in Aus may sound silly but there is 90 and 100mm pipes can extras or others be added ?

Re: Drainage Program

_Tharwat — Sun, 19 Jul 2020 12:08:55 GMT

Yes, your definition is correct.

But the two sizes you mentioned are not existed at least in the Middle east but there is 80 mm size instead of the 75 mm but in imperial size both are the same 3".

Re: Drainage Program

hak_vz — Mon, 20 Jul 2020 12:49:37 GMT

Across central Europe standard nominal diameters for PVC-U pipes and fittings for drainage systems inside buildings are 32, 40, 50, 63, 75, 80, 90 ,100, 110, 125 and 160 mm.

Re: Drainage Program

_Tharwat — Mon, 20 Jul 2020 15:36:51 GMT

Thank you for the info.

Re: Drainage Program

diagodose2009 — Mon, 20 Jul 2020 15:39:51 GMT

Command:
Command: Specify opposite corner:
Command: dp

Error => bad argument type: stringp nil
This program was written by Tharwat Al Shoufi
Command:

Re: Drainage Program

_Tharwat — Mon, 20 Jul 2020 15:50:51 GMT

You need to locate the drawing into your AutoCAD search path like ( Support folder ) then start with any drawing and not in the same drawing that is attached with the program.