topic Re: in Visual LISP, AutoLISP and General Customization Forum

Help

Anonymous — Wed, 17 Nov 1999 01:03:23 GMT

Hi :
I try to program ARX for acad with VC++,
how do I get help from this group ?
Is there a sub group that I must join ?
how do I get there ?

Tai Tu
tai@powersurfr.com

Re: Help

Anonymous — Wed, 17 Nov 1999 01:11:47 GMT

Hi :
I'm try to program ARX for acad with VC++
how do I get help from this group ?
Is there a sub group that I must join ?
how do I get there ?

Tai Tu
tai@powersurfr.com

Re: Help

Anonymous — Wed, 17 Nov 1999 02:10:07 GMT

Hi :
I try to program ARX for acad with VC++
how do I get help from this group ?
Is there a sub group I must join ?
how do I get there ?

Tai Tu
tai@powersurfr.com

Re: Help

Anonymous — Wed, 17 Nov 1999 02:16:33 GMT

Hi :
I try to program ARX for acad with VC++
how do I get help from this group ?
is there a sub group that I must join ?
how do I get there ?

Tai Tu
tai@poewrsurfr.com

Re: Help

Anonymous — Wed, 17 Nov 1999 02:30:01 GMT

Hi :
I try to program ARX for acad with VC++
how do I get help from this group ?
Is there a sub group that I must join ?
how do I get there ?
jason
jasont@powersurfr.com

Re: Help

Anonymous — Thu, 15 Mar 2001 08:46:56 GMT

Hello:
I am working on a optimism problem: Material panel size is 3 x 4, I have a
lot of piece of part. they are all smaill or equal size (like 1.5 x 2, 3x2,
1x4,1x2...) I need the min panel used in a project. How the algorithm will
be? at least tell me how kind of problem it is so I can search on the web
and get the answer. Should I post this to other newsgroup, which one is the
best? You will save me. Thanks very very much.

Sorry, Anne. I do not like to cross post but I have to got the answer as
soon as possible.

Wes

Re:

Anonymous — Thu, 15 Mar 2001 16:33:57 GMT

Weslley -

Unfortunately, your message attached itself to an old one from
Wednesday, November 17, 1999. Try reposting it with a more
descriptive subject than "Help" and the new message will pop up
into the new messages rather than those back in 1999.
--
Anne Brown
Manager, Moderator
Autodesk Product Support discussion groups
Discussion Q&A: http://www.autodesk.com/discussion

Weslley Wang wrote:
>
> Hello:
> I am working on a optimism problem: Material panel size is 3 x 4, I have a
> lot of piece of part. they are all smaill or equal size (like 1.5 x 2, 3x2,
> 1x4,1x2...) (snip)

Re:

Anonymous — Thu, 15 Mar 2001 16:39:22 GMT

I see you have an answer in the VBA discussion group.
--
Anne Brown
Manager, Moderator
Autodesk Product Support discussion groups
Discussion Q&A: http://www.autodesk.com/discussion

Weslley Wang wrote:
>
> Hello:
> I am working on a optimism problem: (snip)

Re: Help

Anonymous — Fri, 27 Apr 2001 23:06:25 GMT

I would like to find the length of multiple lines and each length put out to
a spread sheet. The next step is to have calculated information come back
into autocad in the form of grid coordinates.

I thought about using the entget or entsel but I can't get it to do what I
need it to do.

Any help would be great...

Thanks

Jeff M.

Re:

Anonymous — Sat, 28 Apr 2001 04:37:36 GMT

Email me a example drawing with more information on exactly what you want to
do.
Jeff Milos wrote in message
news:F75A2377C394B0E09E77CA24513C6B81@in.WebX.maYIadrTaRb...
> I would like to find the length of multiple lines and each length put out
to
> a spread sheet. The next step is to have calculated information come back
> into autocad in the form of grid coordinates.
>
> I thought about using the entget or entsel but I can't get it to do what I
> need it to do.
>
> Any help would be great...
>
> Thanks
>
> Jeff M.
>

Re:

Anonymous — Sat, 28 Apr 2001 05:05:08 GMT

Very briefly:

Starting with (entsel ...) or (ssget "X" ...) is good. Then use (entget ...)
to get each line's association list. Use (assoc ...) to extract the 10 and 11
groups, then calculate the length of the line as the distance between those
two points.

Getting the data into Excel automatically without an intermediate file is done
in different ways depending on your AutoCAD version. For AutoCAD 2000/2000i,
see ADOLISP.ZIP from the download page at http://www.fleming-group.com or the
slightly expanded version form the Code Mine section of http://www.acadx.com/.

jrf
Member of the Autodesk Discussion Forum Moderator Program

In article , Jeff Milos
wrote:
> I would like to find the length of multiple lines and each length put out to
> a spread sheet. The next step is to have calculated information come back
> into autocad in the form of grid coordinates.
>
> I thought about using the entget or entsel but I can't get it to do what I
> need it to do.
>
> Any help would be great...
>
> Thanks
>
> Jeff M.
>

Re: Help

Anonymous — Fri, 01 Feb 2002 08:16:21 GMT

Can I ask someone who is running Acad2000 and also someone who is running
Acad2000i to try the following code and post the results.

It appears there may have been a change in format from 2000 and 2002.

(ssnamex (ssget ":N:D" ))

When prompted for "Select Objects", use a Crossing Window to select only a
portion of an Insert object but be sure to have more than 1 subentity
selected.

In 2002 it returns the list in this format.

((3 1 -1 (48.0 0.0 0.0) (0.0 48.0 0.0) (0.0 0.0
48.0)
(26639.4 14913.4 0.0) ) (-1 (0 (26637.9 14918.3
20.5303)) (0 (26664.1 14918.3 20.5303)) (0 (26664.1 14906.6 20.5303)) (0
(26637.9 14906.6 20.5303))))

Thanks Alot

Don

Re:

Anonymous — Sat, 02 Feb 2002 13:54:54 GMT

From Autocad2000 I got the following result.

Command: (ssnamex (ssget ":N:D" ))

Select objects: Specify opposite corner: 6 found

Select objects:
((3 0 -1 (-2.22045e-016 -1.0 0.0) (1.0 -2.22045e-016
0.0) (0.0 0.0 1.0) (81.5625 120.938 0.0)
name:
15ebce8>) (3 0 -1 (-2.22045e-016 -1.0 0.0) (1.0
-2.22045e-016 0.0) (0.0 0.0 1.0) (81.5625 120.938 0.0)
15ebcc0>
) (3 0 -1 (-2.22045e-016 -1.0
0.0)
(1.0 -2.22045e-016 0.0) (0.0 0.0 1.0) (81.5625 120.938 0.0)
15ebcc0> ) (3 0 -1
(-2.22045e-016
-1.0 0.0) (1.0 -2.22045e-016 0.0) (0.0 0.0 1.0) (81.5625 120.938 0.0)

name: 15ebcc0> ) (3 0 -1
(-2.22045e-016 -1.0 0.0) (1.0 -2.22045e-016 0.0) (0.0 0.0 1.0) (81.5625
120.938
0.0) ) (3
15ebca0> 0
-1 (-2.22045e-016 -1.0 0.0) (1.0 -2.22045e-016 0.0) (0.0 0.0 1.0) (81.5625
120.938 0.0) ) (-1 (0 (28.9478
7.91919 80.5271) (0.551357 0.787419 -0.275637)) (0 (68.0605 -19.4678
80.5271)
(0.551357 0.787419 -0.275637)) (0 (60.3539 -30.474 33.6699) (0.551357
0.787419
-0.275637)) (0 (21.2411 -3.08701 33.6699) (0.551357 0.787419 -0.275637))))

--
Bruce Card

"DonB" wrote in message
news:2FBBA88270ECB09F26A74DC7EF2E14A4@in.WebX.maYIadrTaRb...
> Can I ask someone who is running Acad2000 and also someone who is running
> Acad2000i to try the following code and post the results.
>
> It appears there may have been a change in format from 2000 and 2002.
>
> (ssnamex (ssget ":N:D" ))
>
> When prompted for "Select Objects", use a Crossing Window to select only a
> portion of an Insert object but be sure to have more than 1 subentity
> selected.
>
> In 2002 it returns the list in this format.
>
> ((3 1 -1 (48.0 0.0 0.0) (0.0 48.0 0.0) (0.0 0.0
> 48.0)
> (26639.4 14913.4 0.0) ) (-1 (0 (26637.9 14918.3
> 20.5303)) (0 (26664.1 14918.3 20.5303)) (0 (26664.1 14906.6 20.5303)) (0
> (26637.9 14906.6 20.5303))))
>
> Thanks Alot
>
> Don
>
>
>

Re:

Anonymous — Mon, 04 Feb 2002 09:58:45 GMT

That's such a bummer, that used to be a pretty neat trick to get all the
entities in an Insert.

This is a notice then to all who upgrade to R2002. This no longer works.

Thanks

Don

"Bruce Card" wrote in message
news:7E2D4AFDFB9D640DD8463331278D32AE@in.WebX.maYIadrTaRb...
> From Autocad2000 I got the following result.
>
> Command: (ssnamex (ssget ":N:D" ))
>
> Select objects: Specify opposite corner: 6 found
>
> Select objects:
> ((3 0 -1 (-2.22045e-016 -1.0 0.0)
(1.0 -2.22045e-016
> 0.0) (0.0 0.0 1.0) (81.5625 120.938 0.0)
> name:
> 15ebce8>) (3 0 -1 (-2.22045e-016 -1.0 0.0) (1.0
> -2.22045e-016 0.0) (0.0 0.0 1.0) (81.5625 120.938 0.0)
> 15ebcc0>
> ) (3 0 -1 (-2.22045e-016 -1.0
> 0.0)
> (1.0 -2.22045e-016 0.0) (0.0 0.0 1.0) (81.5625 120.938 0.0)
> 15ebcc0> ) (3 0 -1
> (-2.22045e-016
> -1.0 0.0) (1.0 -2.22045e-016 0.0) (0.0 0.0 1.0) (81.5625 120.938 0.0)
>
> name: 15ebcc0> ) (3 0 -1
> (-2.22045e-016 -1.0 0.0) (1.0 -2.22045e-016 0.0) (0.0 0.0 1.0) (81.5625
> 120.938
> 0.0) ) (3
> 15ebca0> 0
> -1 (-2.22045e-016 -1.0 0.0) (1.0 -2.22045e-016 0.0) (0.0 0.0 1.0) (81.5625
> 120.938 0.0) ) (-1 (0
(28.9478
> 7.91919 80.5271) (0.551357 0.787419 -0.275637)) (0 (68.0605 -19.4678
> 80.5271)
> (0.551357 0.787419 -0.275637)) (0 (60.3539 -30.474 33.6699) (0.551357
> 0.787419
> -0.275637)) (0 (21.2411 -3.08701 33.6699) (0.551357 0.787419 -0.275637))))
>
>
> --
> Bruce Card
>
> "DonB" wrote in message
> news:2FBBA88270ECB09F26A74DC7EF2E14A4@in.WebX.maYIadrTaRb...
> > Can I ask someone who is running Acad2000 and also someone who is
running
> > Acad2000i to try the following code and post the results.
> >
> > It appears there may have been a change in format from 2000 and 2002.
> >
> > (ssnamex (ssget ":N:D" ))
> >
> > When prompted for "Select Objects", use a Crossing Window to select only
a
> > portion of an Insert object but be sure to have more than 1 subentity
> > selected.
> >
> > In 2002 it returns the list in this format.
> >
> > ((3 1 -1 (48.0 0.0 0.0) (0.0 48.0 0.0) (0.0 0.0
> > 48.0)
> > (26639.4 14913.4 0.0) ) (-1 (0 (26637.9 14918.3
> > 20.5303)) (0 (26664.1 14918.3 20.5303)) (0 (26664.1 14906.6 20.5303)) (0
> > (26637.9 14906.6 20.5303))))
> >
> > Thanks Alot
> >
> > Don
> >
> >
> >
>
>