topic Re: ObjectDCL is going open source in Visual LISP, AutoLISP and General Customization Forum

ObjectDCL is going open source

Anonymous — Mon, 24 Jul 2006 23:27:55 GMT

Hi, over the last while you might have know that I have been unable to work on ObjectDCL due to a severe medical condition. For this I must apologize. I have decided that since I cannot put the energy in that it deserves, I am going to post ObjectDCL as an open source project on www.sourceforge.net. Anyone will be able to download the compiled software and anyone will be able to sign in and contribute to its further development. Essentially ObjectDCL will become a community development project.

Thanks everyone, Chad Wanless

Re: ObjectDCL is going open source

Anonymous — Mon, 24 Jul 2006 23:36:05 GMT

I hope everything is getting better for you Chad, and will continue to. I
know a lot of people will be happy to help develop the ObjectDCL program.

Best wishes to you and your family.

--

Tim
"A blind man lets nothing block his vision."

wrote in message news:5246892@discussion.autodesk.com...
Hi, over the last while you might have know that I have been unable to work
on ObjectDCL due to a severe medical condition. For this I must apologize.
I have decided that since I cannot put the energy in that it deserves, I am
going to post ObjectDCL as an open source project on www.sourceforge.net.
Anyone will be able to download the compiled software and anyone will be
able to sign in and contribute to its further development. Essentially
ObjectDCL will become a community development project.

Thanks everyone, Chad Wanless

Re: ObjectDCL is going open source

Anonymous — Mon, 24 Jul 2006 23:43:00 GMT

Hope you'll get past the hurdle Chad.
Thank you for the act of generosity. Be well.

Serge J. Gianolla

wrote in message news:5246892@discussion.autodesk.com...
Hi, over the last while you might have know that I have been unable to work
on ObjectDCL due to a severe medical condition. For this I must apologize.
I have decided that since I cannot put the energy in that it deserves, I am
going to post ObjectDCL as an open source project on www.sourceforge.net.
Anyone will be able to download the compiled software and anyone will be
able to sign in and contribute to its further development. Essentially
ObjectDCL will become a community development project.

Thanks everyone, Chad Wanless

Re: ObjectDCL is going open source

Anonymous — Tue, 25 Jul 2006 00:02:31 GMT

Chad,

Thanks for your thoughtfulness. Hope you feel better soon.

wrote in message news:5246892@discussion.autodesk.com...
Hi, over the last while you might have know that I have been unable to work on ObjectDCL
due to a severe medical condition. For this I must apologize. I have decided that since
I cannot put the energy in that it deserves, I am going to post ObjectDCL as an open
source project on www.sourceforge.net. Anyone will be able to download the compiled
software and anyone will be able to sign in and contribute to its further development.
Essentially ObjectDCL will become a community development project.

Thanks everyone, Chad Wanless

Re: ObjectDCL is going open source

Anonymous — Tue, 25 Jul 2006 00:46:28 GMT

Hi Chad. Glad to see you're able to make it here.

Get well soon.

--
http://www.caddzone.com

AcadXTabs: MDI Document Tabs for AutoCAD 2004/2005/2006/2007
http://www.acadxtabs.com

wrote in message news:5246892@discussion.autodesk.com...
Hi, over the last while you might have know that I have been unable to work on ObjectDCL due to a severe medical condition. For this I must apologize. I have decided that since I cannot put the energy in that it deserves, I am going to post ObjectDCL as an open source project on www.sourceforge.net. Anyone will be able to download the compiled software and anyone will be able to sign in and contribute to its further development. Essentially ObjectDCL will become a community development project.

Thanks everyone, Chad Wanless

Re: ObjectDCL is going open source

Anonymous — Tue, 25 Jul 2006 01:12:42 GMT

There's only one Chad!!! I hope everyone else can contribute to your
achievement!!!

Visions...without them we'd still be in the dark...

To all who contribute and share there inginuity...I appload OUTLOUD!!!

Autodesk, without these individual, you'd still be in the box...

You should share your wealth with those who made a difference in your
product...like Chad, and so many others...

I speak in silence, so that I bring no recognition to myself...only know
this...remember those who've sacrified their lives, jobs, time, money...

I no longer code, but work on my education, and personal goals, which don't
include ADT...nor your present nor future releases....

wrote in message news:5246892@discussion.autodesk.com...
Hi, over the last while you might have know that I have been unable to work
on ObjectDCL due to a severe medical condition. For this I must apologize.
I have decided that since I cannot put the energy in that it deserves, I am
going to post ObjectDCL as an open source project on www.sourceforge.net.
Anyone will be able to download the compiled software and anyone will be
able to sign in and contribute to its further development. Essentially
ObjectDCL will become a community development project.

Thanks everyone, Chad Wanless

Re: ObjectDCL is going open source

Anonymous — Tue, 25 Jul 2006 02:12:48 GMT

Chad,
Best wishes for your comfort, and recovery.

PostingObjectDCL as an open source project is an extremely generous offer.

Best Regards
Kerry Brown

//---------
wrote in message news:5246892@discussion.autodesk.com...
Hi, over the last while you might have know that I have been unable to work
on ObjectDCL due to a severe medical condition. For this I must apologize.
I have decided that since I cannot put the energy in that it deserves, I am
going to post ObjectDCL as an open source project on www.sourceforge.net.
Anyone will be able to download the compiled software and anyone will be
able to sign in and contribute to its further development. Essentially
ObjectDCL will become a community development project.

Thanks everyone, Chad Wanless

Re: ObjectDCL is going open source

Anonymous — Tue, 25 Jul 2006 03:44:13 GMT

Hi Chad;

I hope that you get better!

Re: ObjectDCL is going open source

Anonymous — Tue, 25 Jul 2006 04:45:58 GMT

Thank you for your generous efforts. Best wishes!

Re: ObjectDCL is going open source

Anonymous — Tue, 25 Jul 2006 11:07:05 GMT

Chad,

Peace, Faith, Hope. Your always in our Prayers.

jb

Re: ObjectDCL is going open source

Anonymous — Tue, 25 Jul 2006 11:24:53 GMT

Thanks and best of luck with everything.
I've always wondered what this looked like inside..:)

Cheers,
Paul

wrote in message news:5246892@discussion.autodesk.com...
Hi, over the last while you might have know that I have been unable to work
on ObjectDCL due to a severe medical condition. For this I must apologize.
I have decided that since I cannot put the energy in that it deserves, I am
going to post ObjectDCL as an open source project on www.sourceforge.net.
Anyone will be able to download the compiled software and anyone will be
able to sign in and contribute to its further development. Essentially
ObjectDCL will become a community development project.

Thanks everyone, Chad Wanless

Re: ObjectDCL is going open source

Anonymous — Tue, 25 Jul 2006 12:41:43 GMT

Chad,
Thankyou for your generosity, I wish you all the best for the future,

David

Re: ObjectDCL is going open source

Anonymous — Tue, 25 Jul 2006 12:54:27 GMT

I hope you get better soon. As one of the early ObjectDCL users I really
appreciate all of the work that you had put into it and it was an excellent
program.

--
Rodney McManamy
President
CADzation
-------------------------
rmcmanamy@cadzation.com
-------------------------
518 South Route 31 Suite 200
McHenry, IL 60050
http://www.cadzation.com
Providing Industrial Strength
PDF & DWF Solutions to the
Global CAD Marketplace.

wrote in message news:5246892@discussion.autodesk.com...
Hi, over the last while you might have know that I have been unable to work
on ObjectDCL due to a severe medical condition. For this I must apologize.
I have decided that since I cannot put the energy in that it deserves, I am
going to post ObjectDCL as an open source project on www.sourceforge.net.
Anyone will be able to download the compiled software and anyone will be
able to sign in and contribute to its further development. Essentially
ObjectDCL will become a community development project.

Thanks everyone, Chad Wanless

Re: ObjectDCL is going open source

Anonymous — Tue, 25 Jul 2006 13:29:52 GMT

Hi Chad,

This is great news. I was feeling so desapointed to give up on ObjectDCL.
But now I feel relieved. The world would be a much better place if everybody
would express this kind of generosity. With all my sympathy and
consideration, I wish you a speedy recovery and get well soon.

Constantin

a écrit dans le message de news:
5246892@discussion.autodesk.com...
Hi, over the last while you might have know that I have been unable to work
on ObjectDCL due to a severe medical condition. For this I must apologize.
I have decided that since I cannot put the energy in that it deserves, I am
going to post ObjectDCL as an open source project on www.sourceforge.net.
Anyone will be able to download the compiled software and anyone will be
able to sign in and contribute to its further development. Essentially
ObjectDCL will become a community development project.

Thanks everyone, Chad Wanless

Re: ObjectDCL is going open source

Anonymous — Tue, 25 Jul 2006 13:43:26 GMT

Chad,

Thanks for the info, and best wishes for a speedy recovery.

Ken Krupa
Krupa CADD Solutions

wrote in message news:5246892@discussion.autodesk.com...
Hi, over the last while you might have know that I have been unable to work
on ObjectDCL due to a severe medical condition. For this I must apologize.
I have decided that since I cannot put the energy in that it deserves, I am
going to post ObjectDCL as an open source project on www.sourceforge.net.
Anyone will be able to download the compiled software and anyone will be
able to sign in and contribute to its further development. Essentially
ObjectDCL will become a community development project.

Thanks everyone, Chad Wanless

Re: ObjectDCL is going open source

Anonymous — Tue, 25 Jul 2006 13:48:53 GMT

Chad,

Thank you for your contribution to the Autocad Community.

You are a genius. You have shorten the gap among the
programming languages and tailored them together for
people like me. Thank you for making my programs
look good.

Bravo for all your efforts and for the kind gesture. I
wish you well & your family. So go on & beat that
thing & I hope to hear from soon.

Regards,
Carey

Re: ObjectDCL is going open source

Anonymous — Tue, 25 Jul 2006 14:20:12 GMT

Hi Chad.

We're very saddened to hear your medical condition is such that you've not
been able to work on ObjectDCL. Your work on ObjectDCL represents a
significant and inspiring contribution to the CAD community, punctuated by
the generous decision to donate it to open source. We recognize and
sympathise how difficult the decision must have been and indeed the
poignancy of it (your loss, the community's gain). You have our genuine
gratitude and respect; know that our thoughts and prayers are with you and
your family.

- - -
For Mark Thomas and friends at theswamp.org.

wrote in message news:5246892@discussion.autodesk.com...
Hi, over the last while you might have know that I have been unable to work
on ObjectDCL due to a severe medical condition. For this I must apologize.
I have decided that since I cannot put the energy in that it deserves, I am
going to post ObjectDCL as an open source project on www.sourceforge.net.
Anyone will be able to download the compiled software and anyone will be
able to sign in and contribute to its further development. Essentially
ObjectDCL will become a community development project.

Thanks everyone, Chad Wanless

Re: ObjectDCL is going open source

Anonymous — Tue, 25 Jul 2006 14:22:02 GMT

Chad

Best wishes and get well soon.

Gary

Re: ObjectDCL is going open source

Anonymous — Tue, 25 Jul 2006 14:30:55 GMT

Thanks Chad.

Best wishes.

Keep looking up!

Bill

Re: ObjectDCL is going open source

Anonymous — Tue, 25 Jul 2006 14:50:51 GMT

Chad,

Though I'm not familiar with your software, I am aware of the respect it deserves.

Hope you can beat whatever is ailing you.

Thanks for open source, but obviously everyone here hopes you will return to the
project eventually.

Regards
Joe Burke