topic Recovery drawing message in VBA Forum

Recovery drawing message

danijel.radenkovic — Wed, 18 Oct 2017 13:00:01 GMT

Hello to all,

According to my previous topic: https://forums.autodesk.com/t5/visual-basic-customization/rename-a-block-amp-purge-the-drawing/m-p/7425386#M100629

I have made an application which renames block name in the drawing, then make purge and save the drawing.

The problem happens when I try to open the drawing after modification. I am getting the error from the image. I have tested the same application on few other computers and there is no message after opening a drawing. The message is just on my computer.

Do I have something different in AutoCAD settings?

Can you tell me how to avoid a problem of showing the message?

Here is a piece of code:

                For Each objBlock In acDoc.Blocks
                    If objBlock.Name = txtBlockToRename.Text Then
                        objBlock.Name = txtNewBlockName.Text
                        Exit For
                    End If
                Next

                With acDoc
                    .PurgeAll()
                    .Save()
                    .Close()
                End With

Best regards,

Danijel

Re: Recovery drawing message

sieclaprzemyslaw — Thu, 19 Oct 2017 07:20:38 GMT

Hello!

Did you try to use save option during closing? Close method has optional SaveChanges value. Try this:

With acDoc
   .PurgeAll()
   .Close(True)
End With

I saw in previous thread that you have it - but macro was not working in that time. Maybe you should try it again with working macro.

Re: Recovery drawing message

danijel.radenkovic — Thu, 19 Oct 2017 08:26:07 GMT

@sieclaprzemyslaw wrote:

Hello!

Did you try to use save option during closing? Close method has optional SaveChanges value. Try this:
With acDoc
   .PurgeAll()
   .Close(True)
End With
I saw in previous thread that you have it - but macro was not working in that time. Maybe you should try it again with working macro.

Yes, I have tried. Still the same, showing the message.

Re: Recovery drawing message

danijel.radenkovic — Mon, 30 Oct 2017 17:20:30 GMT

Any new idea why the error happens?