topic Re: user properties not mapping in new 2020 vault in Vault Customization Forum

user properties not mapping in new 2020 vault

JasonMayes — Wed, 11 Sep 2019 19:11:15 GMT

Upgraded from Vault Pro 2018 to Vault Pro 2020. Created new server, copied over current back up, restored back up, and mapped all 2020 software to the 2020 Vault. Our cad file title block attribute fields were/are mapped to user properties in the Vault. In 2018 we had no issues but in the new 2020 these are not mapping. I have been told by users that if they do a drawing then purge it that the properties will then map. This is not an acceptable workflow. Any ideas on what would cause this or how to fix it?

Re: user properties not mapping in new 2020 vault

JasonMayes — Thu, 12 Sep 2019 12:39:52 GMT

@Senthil_Kumar @ihayesjr

more details

Inventor part, assembly, IDW files map fine

Autocad Mechanical file only map when "blocks" are purged from drawings.

Thank you for any help,

Jason

Re: user properties not mapping in new 2020 vault

ihayesjr — Thu, 12 Sep 2019 14:48:23 GMT

@JasonMayes Have you installed 2020.1 Update yet?

Re: user properties not mapping in new 2020 vault

JasonMayes — Thu, 12 Sep 2019 15:02:48 GMT

@ihayesjr Yes, both the server and clients are on the 2020.1 update. Acad and Inv are also current on updates.

Re: user properties not mapping in new 2020 vault

ihayesjr — Thu, 12 Sep 2019 15:08:12 GMT

Can you explain what you mean by

I have been told by users that if they do a drawing then purge it that the properties will then map. This is not an acceptable workflow

What are they doing when you say "purge"?

Re: user properties not mapping in new 2020 vault

JasonMayes — Thu, 12 Sep 2019 15:26:34 GMT

@ihayesjr I have attached a word doc. Please take a look.

Re: user properties not mapping in new 2020 vault

ihayesjr — Thu, 12 Sep 2019 16:29:56 GMT

Inside of AutoCAD, what file version are you saving the files in? 2013 or 2018?

Also, can you give me a screen shot of the mapping?

Re: user properties not mapping in new 2020 vault

JasonMayes — Thu, 12 Sep 2019 16:46:22 GMT

Re: user properties not mapping in new 2020 vault

ihayesjr — Thu, 12 Sep 2019 16:48:50 GMT

Can you verify that the title block is set in the ADMS Console for indexing?

Re: user properties not mapping in new 2020 vault

JasonMayes — Thu, 12 Sep 2019 16:50:10 GMT

@ihayesjr

Re: user properties not mapping in new 2020 vault

JasonMayes — Thu, 12 Sep 2019 16:58:02 GMT

How can I verify that?

Re: user properties not mapping in new 2020 vault

JasonMayes — Thu, 12 Sep 2019 17:02:12 GMT

Is this it?

Re: user properties not mapping in new 2020 vault

ihayesjr — Thu, 12 Sep 2019 17:16:49 GMT

Yes, I am wondering if there is some type of priority of the mappings that might be causing the problem.

I see that you have created a support case, I think it would be easier for them to troubleshoot with you them me trying to over the forum. It is strange that the purge command is necessary or that it actually causes it to get the properties in.

Re: user properties not mapping in new 2020 vault

Patrick.De.Neef — Fri, 13 Sep 2019 11:09:05 GMT

Hello Jason

can you verify the following:

check if the folder C:\Program Files\Autodesk\ADMS Professional 2020 \Server\Components contains a file named FilterConfig.xml

If not, I hope you can recover it from your old installation. If so, just copy it over and try the check in again

the contents of the file is something like this

</DWG>
</FilterConfig>

Patrick

Re: user properties not mapping in new 2020 vault

JasonMayes — Fri, 13 Sep 2019 15:21:03 GMT

@Patrick.De.Neef

I have compared both xml files and they are identical. Still not sure what is going on with them not mapping until the dwg has been purged. Inventor file properties are mapping fine and once the dwg has been purged it will map.

Re: user properties not mapping in new 2020 vault

reidmatthew — Tue, 17 Sep 2019 21:49:13 GMT

@JasonMayes and I have looked into this. It appears that one specific nested block in his drawings is the cause of the failed mapping. We are continuing to investigate this behavior internally. Here is a link you can use to see the progress or status of the investigation:

Unable to map properties from an AutoCAD DWG to Vault until certain blocks are purged from the DWG

Note: marking this as a solution so other users can find this and that there is an investigation