topic Robot 2026 load display issue in combination in Robot Structural Analysis Forum

Robot 2026 load display issue in combination

neilhC3LK5 — Tue, 10 Jun 2025 08:11:48 GMT

Hi guys

I started and finished a design of a section of a conveyor belt with Robot 2025 in April 2025.

I installed Robot 2026 on 2 June 2025.

I am currently busy with the design reports and opened my model. When looking at the display of a combination I realised that a lot of my loads are not displaying. My first thought was that I messed up my combinations when I did my design.

I then decided to compare my reactions using Robot 2025 to Robot 2026 and luckily they match.

Below is the model showing all my loads for combination 118 using Robot 2025.

Below is the model showing just two loads for combination 118 using Robot 2026.

Studying the two images you will see that reactions on both of them are exactly the same.

What setting should I change to display all my loads?

Re: Robot 2026 load display issue in combination

DennisVDijk — Tue, 10 Jun 2025 14:24:27 GMT

hello @neilhC3LK5,

press: vv --> displaymenu will show.

loads: tick the boxes you want to show:

Re: Robot 2026 load display issue in combination

barryc — Fri, 04 Jul 2025 07:03:32 GMT

I have the same issue when I have combinations that include combinations.

I have reverted back to 2025 due to this.

Re: Robot 2026 load display issue in combination

ismaeelm — Fri, 04 Jul 2025 07:24:15 GMT

I have the same issue when combinations include combinations (eg. Load comb.99 = combination of dead load cases). When I display loads for Load comb 100 = Case 20 (Live Load) + Comb 99 (all dead load), loads from case 99 are not shown. Reverting to 2025.

Re: Robot 2026 load display issue in combination

okapawal — Mon, 14 Jul 2025 12:14:13 GMT

I have to confirm the issue in 2026 release. Load symbols are not displayed for manual combination included in combinations.

The issue has been reported to the development team for correction.

Excuse us for inconvenience.