topic Re: Incorrect Data - Error Nr.5000 in Robot Structural Analysis Forum

Incorrect Data - Error Nr.5000

Anonymous — Mon, 30 Jan 2012 20:42:49 GMT

During the calculation of a structural model (constitute only by bars elements), when in Buckling Deformation (Analysis Type), I switch off the option Omit case for structure with deformations, an error Nr. 5000 happens, and the calculation process is stopped. This error only happens in this situation, since the model is calculated normally when that option is on.

Is there any way of overpass this error ?

Best regards,

Tarrataca

Re: Incorrect Data - Error Nr.5000

Pawel.Pulak — Tue, 31 Jan 2012 08:10:33 GMT

Error 5000 generally corresponds to memory problems.

If restarting Robot before running your model does not help please attach your model (compressed to ZIP to reduce its size) to check it in more detail.

Regards,

Re: Incorrect Data - Error Nr.5000

Pawel.Pulak — Thu, 02 Feb 2012 14:18:38 GMT

The model was not attached but if it is the same case are reported via reseller then the reason is in using multi-threaded solver for this type of analysis. Please change to Automatic or Sparse in Tools>Job Preferences> Structure analysis

---------------------------------------------
If this post answer your question please click "Accept as Solution". It will help everyone to find answer more quickly!

Regards,

Re: Incorrect Data - Error Nr.5000

jo2ny — Mon, 24 Sep 2012 08:48:07 GMT

I got the same error, I read the discussion above, changed the analysys method to Sparse, and back to Automatic.

When set to Automatic, Robot just crashes. When set to Sparse, i get the 5000 error.

What can I do now?

I attached the model.

Thanks in advance

I'm running Robot x64 on Win 7 x64

Intel Core 2 Quad Q9640 @3.00 GHz

8 Gb Ram

Re: Incorrect Data - Error Nr.5000

Rafal.Gaweda — Mon, 24 Sep 2012 09:02:36 GMT

Ionut

I got the same error,

Change structure type on SHELL ; 3D frame with FEs can not be calculated as FRAME 3D structure.

Re: Incorrect Data - Error Nr.5000

jo2ny — Mon, 24 Sep 2012 10:19:41 GMT

Yep, worked!

Thanks again for your swiftness and precission.

Amazing...

Re: Incorrect Data - Error Nr.5000

Anonymous — Wed, 24 Jul 2013 10:49:55 GMT

Hi,

I recently run an analysis but I've got the same error

I've tried to follow your suggestion above (changing the solver) but the result was still the same. What should I do?

Thanks a lot!

Re: Incorrect Data - Error Nr.5000

Rafal.Gaweda — Wed, 24 Jul 2013 10:59:06 GMT

I recently run an analysis but I've got the same error

File please.

Re: Incorrect Data - Error Nr.5000

Anonymous — Wed, 24 Jul 2013 11:07:00 GMT

Please download the file via link below because the file is quite big

https://share.arup.com/ExPages/filedownload.cfm?FileID=91481249ku67885300ki40800690eg

Thanks for the help Rafal

Regards,

Kurniawan

Re: Incorrect Data - Error Nr.5000

Rafal.Gaweda — Wed, 24 Jul 2013 13:00:44 GMT

I should have been faster:

Re: Incorrect Data - Error Nr.5000

Anonymous — Wed, 24 Jul 2013 13:12:00 GMT

Hi Rafal,

I've sent to you separately

Thanks

Regards,

Kurniawan

Re: Incorrect Data - Error Nr.5000

Anonymous — Wed, 04 Dec 2013 10:12:05 GMT

I'm working on a steel truss power mast and during the calculation of the structural model Robot gives me also the ERROR Nr. 5000. What am I doing wrong?

Many thanks in advance!

Analysis type settings:

Re: Incorrect Data - Error Nr.5000

Artur.Kosakowski — Wed, 04 Dec 2013 21:10:09 GMT

Is the nonlinear analysis convergent? Is it the same after you change the solver type?

Re: Incorrect Data - Error Nr.5000

Anonymous — Thu, 05 Dec 2013 10:53:00 GMT

Nonlinear analysis works fine if not selecting Buckling in the "Change of Analysis Type for Selection of Cases" dialog box. Originally I was using Sparse M solver with MDA when I got the Error Nr. 5000. When changing the solver type to Automatic, Error Nr. 5000 appears again (Seems like Sparse M is used In Automatic as well). By choosing Sparse (without M), after a 20 minute run, I get the results. I also tried Skyline wich runs approximately 5 hours. I got the warning: "Instability (of type 3) detected at node 217 in direction RX". Seems like it is releated to big differences in stiffness of elements. Am I right?

If so, is it correct to choose Sparse as solver and go on with the design?

I'm sending the file separately so You could have a look.

Many thanks in advance!

Re: Incorrect Data - Error Nr.5000

Artur.Kosakowski — Thu, 05 Dec 2013 18:18:07 GMT

If so, is it correct to choose Sparse as solver and go on with the design?

We haven't received the file If you checked the cause of the instability and considered it as not having any negative effect on the obtained results then I think it is.

Re: Incorrect Data - Error Nr.5000

Artur.Kosakowski — Thu, 05 Dec 2013 19:32:51 GMT

I have made the quick initial check running your model with for case 1 only. There is no instability reported.

Re: Incorrect Data - Error Nr.5000

demetris.a.d — Tue, 25 Feb 2014 09:22:23 GMT

hello i have followed all the above suggestions but the error still remains.

i will attch the file

Re: Incorrect Data - Error Nr.5000

Artur.Kosakowski — Tue, 25 Feb 2014 12:05:06 GMT

The values of load are corrupted.

If you find your post answered press the Accept as Solution button please. This will help other users to find solutions much faster. Thank you.

Re: Incorrect Data - Error Nr.5000

Anonymous — Tue, 22 Mar 2016 06:21:09 GMT

Hello,

I have been getting the same error.

I have tried the following:

- Changing analysis type to Sparse and Automatic. The error was removed, but even after 200 modes, the mass participation ratio is still at 5% which is not logical for such a structure.

- Tried changing the modal analysis types, but no use.

- Checking for modeling problems.

Compared to a working older & simpler model than the attached, it seems that the modal analysis is not working as expected.

Please advise. Thank you.

Re: Incorrect Data - Error Nr.5000

Rafal.Gaweda — Wed, 23 Mar 2016 09:51:16 GMT

http://forums.autodesk.com/t5/robot-structural-analysis/error-5000/m-p/6229985#M43044