topic Re: Convert Robot files to Sap2000 in Robot Structural Analysis Forum

Convert Robot files to Sap2000

Anonymous — Thu, 21 Jun 2012 07:31:35 GMT

I am being asked to convert Robot files to SAP2000 but I don't find any way to do it. Please, does anybody know if it is possible?

Thank you.

Re: Convert Robot files to Sap2000

Rafal.Gaweda — Thu, 21 Jun 2012 08:18:14 GMT

From ARSA not possible.

Maybe third party software or SAP converter if exists or write your own usign Robot API or basing on str file.

Re: Convert Robot files to Sap2000

Anonymous — Thu, 21 Jun 2012 08:02:10 GMT

Thank you very much for your quick answer.

Re: Convert Robot files to Sap2000

Anonymous — Thu, 21 Jun 2012 08:47:24 GMT

http://thebuildingcoder.typepad.com/blog/2012/01/curved-analytical-model-approximation-and-etabs-structural-link.html

revit-robot to etabs

Re: Convert Robot files to Sap2000

Artur.Kosakowski — Thu, 21 Jun 2012 08:58:34 GMT

In other words Robot to Revit followed by Revit to ETABS

Re: Convert Robot files to Sap2000

Rafal.Gaweda — Thu, 21 Jun 2012 09:06:37 GMT

In other words Robot to Revit followed by Revit to ETABS

http://www.csiberkeley.com/csixrevit

Re: Convert Robot files to Sap2000

Anonymous — Thu, 21 Jun 2012 09:12:40 GMT

I thank you all.

The point is we don't have Revit. We are just using ARSAProfessional and our client wish to add our calculation model to his SAP2000 model.

Re: Convert Robot files to Sap2000

Anonymous — Thu, 21 Jun 2012 10:33:31 GMT

Sheldon? Is that u? Sheldon Cooper? 🙂

Give me ur model, Im try do it. If ur wish!

Re: Convert Robot files to Sap2000

Anonymous — Thu, 21 Jun 2012 10:59:48 GMT

No, I'm not Sheldon. Sheldon is the guy who seats by my side. How did you know that?

I give you one of the simplest models for a try, thank you.

PS: By the way. How can I show an avatar picture in the posts (like your bridge)?

Re: Convert Robot files to Sap2000

Anonymous — Thu, 21 Jun 2012 17:17:41 GMT

Im home!

probably it works.

Re: Convert Robot files to Sap2000

Anonymous — Fri, 22 Jun 2012 05:47:26 GMT

I see you have converted the files via Revit but we don't have Revit.

I have tried saving as CIM Steel (CIS/2) (*.stp), that works with SAP200 but only with the geometry, neither with loads nor with combinations.

Re: Convert Robot files to Sap2000

mohamed.agrody — Mon, 19 Sep 2016 22:57:37 GMT

excuse me

first thanks for the tip ,and I would like to know if it is a straight forward procedure or there are cetain settings I must choose for it to work?

I only have knowledge in sap2000 that is why I am converting a robot model and it is my first time using both robot and rivet

so any help is highly appreciated

Re: Convert Robot files to Sap2000

Anonymous — Tue, 20 Sep 2016 05:07:55 GMT

So far I did not succeed.