topic Re: Soil pressure in Robot Structural Analysis Forum

Soil pressure

athurD — Tue, 24 Jul 2012 05:42:33 GMT

You could tutorial video Soil pressure retaining wall.

retaining wall problem ?????

Re: Soil pressure

Rafal.Gaweda — Tue, 24 Jul 2012 10:04:02 GMT

Example here: http://screencast.com/t/n1x4jDj3k , I have used predefined soils modified, entered only data you gave us.

Re: Soil pressure

athurD — Tue, 24 Jul 2012 10:20:19 GMT

Thanks you. RG_Adsk

Verry Good.

Re: Soil pressure

athurD — Wed, 25 Jul 2012 08:26:36 GMT

Hi. I is prolem. I is attachment Math manual

Re: Soil pressure

athurD — Wed, 25 Jul 2012 14:33:30 GMT

RG_Adsk

Please help me?

Re: Soil pressure

Rafal.Gaweda — Wed, 25 Jul 2012 14:56:36 GMT

http://docs.autodesk.com/RSA/2012/ENU/filesROBOT/GUID-6774D010-E6B5-430D-9379-678ECB43245-479.htm

"Data that specifies the soil work that results from the displacement of a retaining element. The displacement is defined using the rotation element r, which is assumed to be approximately equal to: f/H (wall top displacement / element height). The soil work mode can be determined as:

- Active pressure Ka -> ρa ≤ ρ < 0

- Static pressure Ko -> ρ = 0

- Passive pressure Kp -> 0 < ρ ≤ ρp"

so specify f/H as -0.406 or 0.406 or calculated f/H

Re: Soil pressure

athurD — Wed, 25 Jul 2012 15:08:15 GMT

Thanks you.

But I Comparison of hand and the results of Robot.

Re: Soil pressure

athurD — Fri, 27 Jul 2012 03:10:21 GMT

please help me???

Re: Soil pressure

Artur.Kosakowski — Fri, 27 Jul 2012 06:59:31 GMT

Re: Soil pressure

athurD — Sat, 28 Jul 2012 09:52:14 GMT

Thanks Artur.Kosakowski

But I not do.

You can tutorial video?????

THanks Artur.Kosakowski

Re: Soil pressure

Artur.Kosakowski — Mon, 30 Jul 2012 07:39:15 GMT

Here you are.

Re: Soil pressure

athurD — Mon, 30 Jul 2012 10:57:33 GMT

Thanks you Artur.Kosakowski

Re: Soil pressure

Anonymous — Thu, 04 Jul 2013 09:19:49 GMT

HI ALL

I have an error when use special load

pl see picture

in this link my file

http://www.mediafire.com/?100h19r4zgi10tp

thanks

Re: Soil pressure

Artur.Kosakowski — Thu, 04 Jul 2013 09:42:49 GMT

See the attached picture.

If you find your post answered press the Accept as Solution button please. This will help other users to find solutions much faster. Thank you.

Re: Soil pressure

Anonymous — Thu, 04 Jul 2013 16:10:03 GMT

thanks you

but error display again

thanks you very much

Re: Soil pressure

Artur.Kosakowski — Fri, 05 Jul 2013 06:23:43 GMT

Expand the load selection list and select one of the loads. This should result in display of this load at the top of the soil load dialog. Then follow the steps indicated in my previous answer.

If you find your post answered press the Accept as Solution button please. This will help other users to find solutions much faster. Thank you.

Re: Soil pressure

Anonymous — Fri, 05 Jul 2013 09:05:46 GMT

thanks artur

can you guide me calculation retailing wall in excersice below use robot

THANKS YOU

Re: Soil pressure

Artur.Kosakowski — Fri, 05 Jul 2013 09:11:18 GMT

In general Robot is not intended for this kind of calculations. It is due to the fact that you need to define some boundary conditions (supports) to converge the analysis (that cannot be achieved based on finding the equilibrium of applied loads with no supports defined).

If you find your post answered press the Accept as Solution button please. This will help other users to find solutions much faster. Thank you.

Re: Soil pressure

Anonymous — Fri, 05 Jul 2013 09:22:51 GMT

tks autur

I am learing robot and revit structure. Can you share for me a project completed in revit structure . that is drawing construction? I use it for learning revit

thanks you very much

my email: duchoatla@gmail.com

Re: Soil pressure

Artur.Kosakowski — Fri, 05 Jul 2013 09:54:56 GMT

Please use the dedicated Revit Structure forum for that kind of requests. Thank you.