topic Re: Installing RSAP Design Spreadsheets silently... in Robot Structural Analysis Forum

Installing RSAP Design Spreadsheets silently...

ukdxb012 — Mon, 21 Jan 2013 12:23:47 GMT

Hi There,

Has anyone tried to install RSAP Design Spreadsheets / Spreadsheet Calculator silently via SMS or as a package??? I need some advice on how to do this if possible.

Regards,

Duncan

Re: Installing RSAP Design Spreadsheets silently...

Rafal.Gaweda — Mon, 21 Jan 2013 12:43:16 GMT

It is, by installshield script.

I will try to prepare procedure and post it here.

Re: Installing RSAP Design Spreadsheets silently...

ukdxb012 — Mon, 21 Jan 2013 12:45:09 GMT

That would be great help! Many thanks and i will look out for your reply 🙂

Re: Installing RSAP Design Spreadsheets silently...

Rafal.Gaweda — Mon, 21 Jan 2013 13:14:04 GMT

I have updated old document. Screen Shots (paths \ filenames) are outdated but the rest should work.

Of course you can use batch file \ command to run installation:

SpreadsheetCalculator2013_Content.exe -s -f2c:\SC.log (log file SC.log will be created on each computer on c: root folder)

Re: Installing RSAP Design Spreadsheets silently...

ukdxb012 — Mon, 21 Jan 2013 15:48:04 GMT

Many thanks for providing this, however, i'm stuggling to get this to work i think... Are you able to offer any further advice?

I have managed to create a setup.iss file located in the Windows folder by using the -r (switch) which i have copied into a folder on our shared network drive which uses dfs for replication along with the spreadsheetcalculator2013_content.exe

Then I created an ipf file with the following information...

item: Remark
Text=---Robot Structural Analysis Pro Design Spreadsheets for Autodesk Robot Structural Analysis 2013---
end
item: Execute Program
Pathname=Extensions\spreadsheetcalculator2013_content.exe
Command Line=/s
Default Directory=\\dfs\KITS\ADesk\Robot Structural Analysis Pro 2013 X64
Flags=00000010
end

Extensions is the folder with the exe and the iss in.

I then compiled the ipf too an exe file and ran the file which seems to do something, however if i check the Control Panel, it doesnt state that the Design Spreadsheets are installed...

I've tried the shortcut as suggested but it didnt do as expected... am i pathing to the wrong thing?

I did have success with the Log file as suggested but it gave me very little information...

[InstallShield Silent]
Version=v7.00
File=Log File
[ResponseResult]
ResultCode=-5

Regards,

Re: Installing RSAP Design Spreadsheets silently...

Rafal.Gaweda — Mon, 21 Jan 2013 16:03:11 GMT

1. Check if SC is working as it should - load any sheet from library.

2. Run installation (-r) manually \ by batch

3. Let me know the results. If failed I need to check this installation on my side.

Re: Installing RSAP Design Spreadsheets silently...

ukdxb012 — Mon, 21 Jan 2013 16:11:44 GMT

When i load the Spreadsheet Calculator i just get a blank sheet with no options to select a template...

Installing manually, the Design Spreadsheet works fine and i get a pop up asking which template i want, i just need a way to install this working method silently via SMS.

Would you mind checking from your side and confirming the steps etc.

Regards,

Duncan

Re: Installing RSAP Design Spreadsheets silently...

Rafal.Gaweda — Tue, 22 Jan 2013 08:23:25 GMT

Thanks for reply , I will check.

Re: Installing RSAP Design Spreadsheets silently...

ukdxb012 — Tue, 29 Jan 2013 22:59:11 GMT

Hi Rafal,

I was wondering if there is an update to this or can i presume that it is not possible to install this silently? i did receive an email from Autodesk asking if this had been resolved of which i said no, but that was the last i heard anything...

Thanks in advance

Re: Installing RSAP Design Spreadsheets silently...

Rafal.Gaweda — Wed, 30 Jan 2013 08:34:56 GMT

I am working on it. No final conlusion yet.

Sorry for delay.

Re: Installing RSAP Design Spreadsheets silently...

Rafal.Gaweda — Wed, 13 Feb 2013 15:47:23 GMT

It seems my fault, I have forgotten that instalation should be "unpacked installation".

use this package http://www.4shared.com/zip/TFRANA_3/SC2013_Content.html

unpack all files to one folder then use setup.exe to record then run installation

Re: Installing RSAP Design Spreadsheets silently...

ukdxb012 — Wed, 30 Oct 2013 13:14:19 GMT

Rafal,

Do you know if the same process applies to the 2014 version of the Design Spreadsheets to install them silently?

Regards,

Duncan

Re: Installing RSAP Design Spreadsheets silently...

Rafal.Gaweda — Wed, 30 Oct 2013 13:47:54 GMT

Should work.

Re: Installing RSAP Design Spreadsheets silently...

ukdxb012 — Wed, 30 Oct 2013 14:34:21 GMT

I'm afraid not, it's asking for the next disk...

"Please insert disk 2 that contains the file data2.cab" - I cannot find this anywhere unfortunately!

P.S - Is there a more simpler may to do this?

Regards,

Duncan

Re: Installing RSAP Design Spreadsheets silently...

Rafal.Gaweda — Wed, 30 Oct 2013 15:20:12 GMT

I will send you package - most likely tomorrow.

Re: Installing RSAP Design Spreadsheets silently...

ukdxb012 — Wed, 30 Oct 2013 15:21:14 GMT

Many Thanks!

Re: Installing RSAP Design Spreadsheets silently...

Rafal.Gaweda — Wed, 30 Oct 2013 15:57:44 GMT

Package : http://we.tl/Wgh4YkKaH2

Re: Installing RSAP Design Spreadsheets silently...

ukdxb012 — Thu, 31 Oct 2013 10:30:45 GMT

Rafal,

Thanks for the download, this now works as expected, many thanks 🙂

Regards,

Duncan