topic Re: Concrete Column Base connection in Robot Structural Analysis Forum

Concrete Column Base connection

bartolome1819 — Wed, 27 Feb 2013 03:56:11 GMT

Hello, about this connection, when I run a steel structure and I select one joint (fixed) the program ask me if I want to create a footing (single foundation) for that element (a steel column IPE), after I accept the program calculate the foundation, I open the module "steel conection verification" in order to create a concrete column base. I see on my structure the steel column and the foundation But, the button "concrete column base" is disable. My question is, how I can get this button enable to make this connection (steel column -> concrete column base to one foundation). Thank You.

Re: Connections: Column base design concrete reinforcement

bartolome1819 — Wed, 27 Feb 2013 03:47:24 GMT

Re: Connections: Column base design concrete reinforcement

bartolome1819 — Wed, 27 Feb 2013 03:51:51 GMT

Re: Concrete Column Base connection

Artur.Kosakowski — Wed, 27 Feb 2013 08:01:03 GMT

Select he column and its bottom (supported) node and press the indicated button

If you find your post answered press the Accept as Solution button please. This will help other users to find solutions much faster. Thank you.

Re: Concrete Column Base connection

bartolome1819 — Wed, 27 Feb 2013 14:52:18 GMT

Thank you for your time, I know that with this button I can design a base, but my question is, why if I have concrete and a steel column, the button "concrete column base" is disabled.??

Thank you

Re: Concrete Column Base connection

Artur.Kosakowski — Wed, 27 Feb 2013 15:07:31 GMT

This connection type is available for French CM66 code only but I assume this is not the type you want to use for your frame

If you find your post answered press the Accept as Solution button please. This will help other users to find solutions much faster. Thank you.

Re: Concrete Column Base connection

bartolome1819 — Wed, 27 Feb 2013 15:28:40 GMT

ahhh ok!!! thank you!!

saludos desde Caracas - Venezuela

Re: Concrete Column Base connection

bartolome1819 — Wed, 27 Feb 2013 18:44:41 GMT

Last question 1) for this topic, on the same picture I posted here, how can I see the reinforcement bars on the foundation in the main window?
I'm using 3d frame design, I don't know if I need to open a building design project to see the reinforcement bars.
2) In others autocad programs, I can select one element (a beam, a column, a line) and hide the rest of the structure (ideal for edit) and I can draw references lines, references planes and points. The question is, How can I select one element and hide all the rest of the structure? And, How can I draw reference lines points and planes?

Thank you!!

Re: Concrete Column Base connection

Artur.Kosakowski — Thu, 28 Feb 2013 08:11:16 GMT

1) for this topic, on the same picture I posted here, how can I see the reinforcement bars on the foundation in the main window?

You can't. You can see them only in the RC Design modules.

2) The question is, How can I select one element and hide all the rest of the structure?

You select the part of the model you want top see and open it in a new window

And, How can I draw reference lines

points

and planes?

If you find your post answered press the Accept as Solution button please. This will help other users to find solutions much faster. Thank you.

Re: Concrete Column Base connection

bartolome1819 — Thu, 28 Feb 2013 12:45:20 GMT

Thanks a lot