topic Re: Structural detailing in Robot Structural Analysis Forum

Structural detailing

Anonymous — Tue, 19 Nov 2013 01:55:56 GMT

hi guys, i have done designed my structure but i m wonder how can i withdraw all the beams reinforccement detailing of the whole structure in one click instead of clicking at every beam and check the reinforcement. If we click beam by beam is very troublesome and slow. Thank you so much

how to withdraw the structural detailing of all beams and columns in one click?

Anonymous — Mon, 18 Nov 2013 18:03:29 GMT

Re: Structural detailing

Artur.Kosakowski — Tue, 19 Nov 2013 09:30:27 GMT

If you mean to display reinforcement distribution in the 3D model of a structure then this is currently not possible.

Re: Structural detailing

Anonymous — Tue, 19 Nov 2013 14:10:56 GMT

hi thx for your reply. Actually what i want is like withdraw all the beam details in one autocad file juz like the file i attached below. it wil be easier cause i do not have to click every beam one by one

Re: Structural detailing

Artur.Kosakowski — Tue, 19 Nov 2013 14:18:18 GMT

There are two options I can think of:

1. In Robot you can generate drawings of each beam and then arrange them on a larger page. Then you can just access such created 'bigger' drawing and see all of them at the same time.

2. Export drawings to ASD Reinforcement and arrange them as you want to.

If you find your post answered press the Accept as Solution button please. This will help other users to find solutions much faster. Thank you.

Re: Structural detailing

Anonymous — Tue, 19 Nov 2013 15:42:02 GMT

hi 😃 thank you for ur reply.. yea u got my point. is there any option that all beams can be withdraw instantly instead of one by one? cause the drawing that i attached before was generated by the other software in juz few clicks, it eventually saves a lot of time.

Re: Structural detailing

Artur.Kosakowski — Tue, 19 Nov 2013 16:15:01 GMT

When you run calculations of reinforcement mark generation of drawings.

Save rtd file and open the drawings in ASD marking the check box next to the Robot file name.

http://forums.autodesk.com/t5/Robot-Structural-Analysis/export-drawings-from-robot-2012-to-asd-2013/m-p/3658774

If you find your post answered press the Accept as Solution button please. This will help other users to find solutions much faster. Thank you.

Re: Structural detailing

Anonymous — Wed, 20 Nov 2013 14:56:46 GMT

hi sir, thank you so much! btw, is it possible to export file from robot to autocad, cause ASD for student has been taken away and i dun get to use it anymore..

Re: Structural detailing

Rafal.Gaweda — Wed, 20 Nov 2013 15:51:10 GMT

Generate drawings in Robot then from Drawings layout:

Slab design

Anonymous — Wed, 20 Nov 2013 16:29:42 GMT

hi sir, thank you so much.. btw when i wana design slab right.. i have done the following steps but ntg comes out for my slab reinforcement. can u show me the proper way to design for a slab.?

this is what i have done:

1) highlight all the floors

2) slab requried reinforcement

3) then click calculate at the "plate and shell calculation"

after finished calculating, i choose slab provided reinforcement.. then i see ntg =.= may i know is this the proper way?

Re: Slab design

Rafal.Gaweda — Thu, 21 Nov 2013 11:29:13 GMT

example movie : http://screencast.com/t/zuxKpIEN91K9