topic Re: (API) Addin: Walls To Loads in Robot Structural Analysis Forum

(API) Addin: Walls To Loads

Romanich — Tue, 10 Dec 2013 13:57:39 GMT

Hi,

This addin will create loads from the selected walls.

Known limitations:

- only rectangular walls with the object type Contour will be converted
- openings are not taken into account
- if number and name of the load case is empty, load case Walls with number 99 will be created

- it is necessary to save/close/open the model after adding/modifications and start the addin to set object numbers in loads table (the reason is small bug in API)

Re: (API) Addin: Walls To Loads

Rafal.Gaweda — Tue, 10 Dec 2013 14:45:26 GMT

Cool. Added to our list of addins

Re: (API) Addin: Walls To Loads

nguyen_thang_nhat_quang — Tue, 18 Apr 2017 02:38:40 GMT

Hi Admin

Ii is very useful for me, But I am understanding how to use it?, Can you take short video, Please!

Thank you

Fan Robot Structural Analyse!

Re: (API) Addin: Walls To Loads

Romanich — Tue, 18 Apr 2017 04:42:24 GMT

Xin chào,

https://youtu.be/RSv3MVzyumA

Re: (API) Addin: Walls To Loads

MHDCACO — Fri, 27 Oct 2023 10:09:08 GMT

Hello, is it working for RSA 2024?

Re: (API) Addin: Walls To Loads

Romanich — Fri, 27 Oct 2023 13:35:00 GMT

Hi @MHDCACO,

It should work.

Re: (API) Addin: Walls To Loads

MHDCACO — Fri, 27 Oct 2023 13:40:17 GMT

I have transfered Partiton Wall from Revit to robot and when i use your application it just create a polyline. IWhat can be the issue?

Re: (API) Addin: Walls To Loads

Romanich — Fri, 27 Oct 2023 14:48:19 GMT

Technically the linear load should be assigned to polyline. Please check if the correct material is assigned to the partition wall.

Re: (API) Addin: Walls To Loads

MHDCACO — Mon, 30 Oct 2023 14:34:36 GMT

Yes It was the material. I've changed it but i notice sometime it works sometimes not.