topic Re: Robot's not letting me create things in Robot Structural Analysis Forum

Robot's not letting me create things

Anonymous — Mon, 17 Mar 2014 23:19:14 GMT

I need some help because I haven't found anything on the internet that resembles what's happening to me. This is my first time using this software, but the program won't let me create anything at all!!!! I can't create bars. I put the beginning point and then when I clik the end and nothing happens!! It doesn't create the bar, but there's no error. Also, I was only able to create one column, then it didn't let me create anything else. I tried on 2D frame, on building analysis and... well, nothing!!! I'm trying reinstalling, but any ideas on the topic would be super helpful!!!!

Re: Robot's not letting me create things

Artur.Kosakowski — Tue, 18 Mar 2014 07:28:04 GMT

Try to attach a movie that shows what is happening while you start using Robot so that we have a better understanding of a situation.

Re: Robot's not letting me create things

Mirko.Jurcevic — Tue, 18 Mar 2014 08:41:30 GMT

Try to reduce display acceleration slider.

Set it as shown in the picture.

Re: Robot's not letting me create things

Anonymous — Wed, 19 Mar 2014 18:47:25 GMT

I can't make a video, I don't have any software for that... And there's not
much to see anyway. With columns I can create just the one. When I click to
create another, it just won't let me, it won't do anything. With I click on
the icon of bars, the dialogue box where I can pick the materials and
sections appears, and I can click for the beginning of the bar, but when
I'm going ti click the end point, it won't do anything again. It's like the
program doesn't realize I'm clicking everywhere to try to create the bar...
It's super weird

Re: Robot's not letting me create things

Anonymous — Wed, 19 Mar 2014 18:48:25 GMT

I have no idea what you mean by that... :S I'm a total newbie...

Re: Robot's not letting me create things

Anonymous — Wed, 19 Mar 2014 19:25:31 GMT

I think I just understood what's happening. Everything I create (I tried creating objets like arcs and circles), it doesn't matter where I click it's like I'm only doing it on one point, which is 0,0... Hmmm, this is hard to explain... The beginning and ending point of everything is 0,0!! It's doesn't matter if I specify something completely different. I create a node, it goes to 0,0. I create a column, it goes to 0,0. I create a bar, the beginning and end point is 0,0. That;s why I can't create anyhting...

Any ideas on how to fix this?????????

Re: Robot's not letting me create things

Mirko.Jurcevic — Wed, 19 Mar 2014 21:07:57 GMT

Here, download Jing. It's free software for screen recording:

http://www.techsmith.com/jing.html

Try to record what you've been doing and share the video.

Re: Robot's not letting me create things

Anonymous — Thu, 20 Mar 2014 08:35:02 GMT

Try Creating Axis system first, you should be able to see the Grid Lines. Then try to model along those lines.

Re: Robot's not letting me create things

Anonymous — Thu, 20 Mar 2014 18:47:18 GMT

ok so I did it, thank you for the software suggestion

Here's the link to the video. Thank you for your help
http://screencast.com/t/rNPE8AKZO6Q

Re: Robot's not letting me create things

Anonymous — Thu, 20 Mar 2014 18:56:18 GMT

I already tried that, it still does the same thing

Re: Robot's not letting me create things

Mirko.Jurcevic — Thu, 20 Mar 2014 19:04:50 GMT

Try to delete contents of CfgUsr folder.

Turn Robot off before that.

CfgUsr folder location:

C:\Users\"yourUserName"\AppData\Roaming\Autodesk\Autodesk Robot Structural Analysis 2014\CfgUsr

Re: Robot's not letting me create things

Anonymous — Thu, 20 Mar 2014 23:16:18 GMT

What do you mean by turn off?? Close the program?? (I'm sorry, I'm not
really good with computers)

Re: Robot's not letting me create things

Anonymous — Fri, 21 Mar 2014 04:22:24 GMT

Yes. He means to close the Robot first before you delete those files. [Copy those files as backup for later reference.]

Here is the screenshot of the contents of that folder. My Robot is working fine, so check with your folder.

I dont know what these files contains except that some of them has color and font information for the Robot. I am curious to know though.

Re: Robot's not letting me create things

Anonymous — Fri, 21 Mar 2014 05:15:18 GMT

Well, it didn't work... 😞 Robot's driving me crazy...

Re: Robot's not letting me create things

Mirko.Jurcevic — Fri, 21 Mar 2014 07:22:49 GMT

Have you tried to manually enter Beginning and End coordinates?

Enter coordinates and click "Add".

For example:

5 ; 3

15 ; 4

Add

Re: Robot's not letting me create things

Mirko.Jurcevic — Fri, 21 Mar 2014 07:26:39 GMT

And please, tell us your computer hardware configuration.

Is that Windows 8 you're using?

Re: Robot's not letting me create things

Anonymous — Fri, 21 Mar 2014 07:52:38 GMT

Try creating nodes (by clicking once and by manually giving coordinates once) at some locations and see whether they are being created or not .

Re: Robot's not letting me create things

Artur.Kosakowski — Fri, 21 Mar 2014 09:06:11 GMT

Well, it didn't work... 😞 Robot's driving me crazy...

1. Geometry > Structure Type > select a shell model (silo)

2. Geometry > Structure type > select the model type you want to work with (2D frame / 3D frame)

If you find your post answered press the Accept as Solution button please. This will help other users to find solutions much faster. Thank you.

Re: Robot's not letting me create things

Anonymous — Fri, 21 Mar 2014 15:25:20 GMT

My computer has Windows Home 7, 64-bit. It's a Toshiba Satellite if that helps

Re: Robot's not letting me create things

Anonymous — Fri, 21 Mar 2014 15:27:04 GMT

Yes, I also tried that and didn't work. Creating nodes doesn't help either because it only creates one node in 0,0, again...