topic Re: stirrups in Robot Structural Analysis Forum

stirrups

MUHANNAD.ABU_ABDO — Mon, 01 Sep 2014 14:18:15 GMT

Re: stirrups

HoshangMustafa — Tue, 02 Sep 2014 05:26:48 GMT

This means that the position where the first stirrup will be set. This data is input by you. So you can change it to other value (e,g, 5cm instead of 2m).

Re: stirrups

MUHANNAD.ABU_ABDO — Tue, 02 Sep 2014 05:45:22 GMT

Ok , what about decrease the distance between stirrups in the first 2 meters ? how i can do it ? for seismic requirements you need to intensification the stirrups

Re: stirrups

HoshangMustafa — Tue, 02 Sep 2014 06:04:38 GMT

You can use stirrup distribution. Please find the attached file.

Re: stirrups

MUHANNAD.ABU_ABDO — Tue, 02 Sep 2014 06:17:24 GMT

yes i tried, but the software put two stirrups over each other

Re: stirrups

MUHANNAD.ABU_ABDO — Tue, 02 Sep 2014 09:50:19 GMT

i want to edit distribution of stirrups , but the robot put a new stirrups with new hangers !! why ? how i can edit the original distribution ?

with all respect

Re: stirrups

Artur.Kosakowski — Tue, 02 Sep 2014 10:38:01 GMT

If you find your post answered press the Accept as Solution button please. This will help other users to find solutions much faster. Thank you.

Re: stirrups

MUHANNAD.ABU_ABDO — Tue, 02 Sep 2014 19:18:25 GMT

thanks a lot , but my questions is the number of stirrups is 22 and this distribute from on side left or right !! this will give you intensification for stirrups from one side ! so what about other side , in reality there's symmetry in the distribution ??

Re: stirrups

Artur.Kosakowski — Wed, 03 Sep 2014 08:00:05 GMT

If you find your post answered press the Accept as Solution button please. This will help other users to find solutions much faster. Thank you.

Re: stirrups

MUHANNAD.ABU_ABDO — Thu, 04 Sep 2014 11:28:04 GMT

Many thanks ... it's work ... could i ask small question ? i want to change angle of hook reinforcement but there's problem some bars done but others not ?

what is the correct way to do it ? and i want to ask is there's main bars shapes ? or it's just one ?

Re: stirrups

Artur.Kosakowski — Thu, 04 Sep 2014 12:54:32 GMT

If you mean the one with no hooks on the left hand side then I think it is the anchorage loop rather than the top reinforcement.

If you find your post answered press the Accept as Solution button please. This will help other users to find solutions much faster. Thank you.