topic object line in Robot Structural Analysis Forum

object line

Anonymous — Mon, 15 Feb 2016 19:11:14 GMT

Hello, I do the calculation of the Foundation plate, asked all the necessary features, want using line the walls ask how to make so that the program saw a line object as a wall? Thanks in advance!

Re: object line

Rafal.Gaweda — Tue, 16 Feb 2016 07:34:44 GMT

?????????
Check:
http://forums.autodesk.com/t5/robot-structural-analysis/api-bars-under-the-curtain-walls/td-p/4607379

or

http://forums.autodesk.com/t5/robot-structural-analysis/api-addin-walls-to-loads/td-p/4684075

Re: object line

Anonymous — Tue, 16 Feb 2016 07:52:42 GMT

I want to not take into account the weight of the wall, but the derivation of the result distribution the moments went as if there were walls , and not the line.

Re: object line

Anonymous — Tue, 16 Feb 2016 08:01:57 GMT

on the left of the model using the line object and application of load to the right model with the walls, the points are distributed differently, I want when the lines were moments similar to the moments of the walls. Is this possible?

Re: object line

Rafal.Gaweda — Tue, 16 Feb 2016 08:09:49 GMT

As far as I understood you : in the left model you modeled walls as wall objects (panels) with their stiffeness ; on the right hand side you replaced walls by "line loads" (on stifffeness). So two not comparable models from the "stiffeness"point of view gives you different results.
If it is not the case please send us \ attach the file to post.

Re: object line

Anonymous — Tue, 16 Feb 2016 08:35:19 GMT

here is a model

Re: object line

Rafal.Gaweda — Tue, 16 Feb 2016 11:06:25 GMT

This is exactly what I suspected.
Left model has walls , right with no walls
see the results for case 2 for slabs 1 2 - the same
for cases 1 and 3 where the walls are \ are loaded, results are different on panels 1 2

Re: object line

Anonymous — Tue, 16 Feb 2016 11:11:23 GMT

that is, using different functions to a single result is not to come ?

Re: object line

Rafal.Gaweda — Tue, 16 Feb 2016 11:19:38 GMT

Sorry I do not get it.

Write in Russian

Re: object line

Anonymous — Tue, 16 Feb 2016 11:26:07 GMT

можно ли через функцию линия задать стенку чтобы получить аналогичные результаты? или невозможно этого сделать?

Re: object line

Rafal.Gaweda — Tue, 16 Feb 2016 11:42:10 GMT

No, not possible because line has no stiffness
See
http://forums.autodesk.com/t5/robot-structural-analysis/foundation-plate/td-p/6040451/page/2

Re: object line

Anonymous — Tue, 16 Feb 2016 11:46:03 GMT

Спасибо!