topic Re: more diagrams values in Robot Structural Analysis Forum

more diagrams values

Anonymous — Wed, 01 Jun 2016 16:29:10 GMT

I appologise for my English.

1.How can I see more or other values of the diagrams. ( max values on the span) - Picture "values".

2. Why do the program consider an error, sense changing of x local axis for selected panels as the other panel are. - Picture "dif.loc.ax"

Re: more diagrams values

Rafacascudo — Wed, 01 Jun 2016 16:44:27 GMT

1- A panel cut will only give you max and min values on a panel. If you want to see more values divide this panel in 2 ,3 parts. The table below on your picture will give you values along the cut length

2-You can set the Panel X local axis in any direction you want using Geometry/properties/Local panel direction

Re: more diagrams values

Anonymous — Thu, 02 Jun 2016 16:58:36 GMT

Thank you.

The first is clear.

For the second question, first of all I changed the sense of x axis for the selected panels, as the others are.

The program said it is a wrong choice and didn't return results for the panels (changed).

Re: more diagrams values

Artur.Kosakowski — Fri, 03 Jun 2016 07:30:10 GMT

In addition to the suggestion of Rafacascudo you may also have a look at the detailed (cut) diagram analysis on the Cuts tab whwee you can move along the cut to check the current value.

Could you attach the model?

Re: more diagrams values

Anonymous — Fri, 03 Jun 2016 12:26:00 GMT

Well. I think was a mistake with the direction vector I used.. I write first 0;0;1, the program turns 90deg x dir. but with the error in calculation.

With the vector 1;0;0; did the same rotation without error. It is something I missing.

Thank you again.