topic Re: applying load to panel in Robot Structural Analysis Forum

applying load to panel

Anonymous — Wed, 26 Apr 2017 13:15:11 GMT

hi guys,

I need your help, I have this warning that "linear load has not been applied to a panel" what should I do and how do I do it to solve to problem for me to proceed on my design. see attached please

thanks for your effect.

Re: applying load to panel

Rafal.Gaweda — Wed, 26 Apr 2017 14:17:27 GMT

Try this:

https://forums.autodesk.com/t5/robot-structural-analysis-forum/error-2110-problem-with-linear-loads/m-p/5881339?nobounce=#M38907

IF not, we need your model.

Re: applying load to panel

Anonymous — Wed, 26 Apr 2017 15:26:54 GMT

thanks. please I have attached the file now (zip). please look at it and tell met how to solve the problem or you do the correction and send it back to me.

thanks a lot.

Re: applying load to panel

Rafal.Gaweda — Thu, 27 Apr 2017 10:17:50 GMT

You need to check claddings coordinates \ panels meeting with claddings coordinates

For example claddings such as 2507 2511 2527 2531 (and similar) should have Y coord = 12,250000000

Check them \ correct them looking at load case 8

You may use this:

https://forums.autodesk.com/t5/robot-structural-analysis-forum/vba-excel-macro-for-any-object-geometry-modifications-api/m-p/6897727#M51067