topic Re: Slab Spanning Direction Issue in Robot Structural Analysis Forum

Slab Spanning Direction Issue

eoin.duggan — Mon, 29 May 2017 10:58:39 GMT

Hello,

I'm having an issue with defining the slab span direction in my building model.

I have composite floors and metal deck roofs that I wish to span in the X-direction. However, they currently span in the Y-direction, despite having specified that the panels are to span in the X direction.

On the attached model you can see that under gk_upper roof that not distributing any load to the beams running the Y-axis. I would appreciate your help in rectifying this.

Thanks,

Eoin

Re: Slab Spanning Direction Issue

ByrnePM — Mon, 29 May 2017 11:40:08 GMT

Eoin,

You need to change the local panel orientation to match the global X asix orientation,

To do this, I had to change your structure type to shell design - then select your roof panel and go to geometry - properties local panel direction and change to global X vector

(see load distribution of roof panel below)

Re: Slab Spanning Direction Issue

Mohammed_Ata — Tue, 30 May 2017 21:30:52 GMT

In addition to said, see this discussion

https://forums.autodesk.com/t5/robot-structural-analysis-forum/i-don-t-see-region-load/td-p/7116892