topic Snow/Wind Error Code in Robot Structural Analysis Forum

Snow/Wind Error Code

Anonymous — Mon, 02 Oct 2017 09:59:46 GMT

I am trying to add a wind/snow load onto my 2d frame,

the error code Snow/wind error code: 0x0006000b is appearing

Anyone know how to solve this so i can apply this wind/snow load

Re: Snow/Wind Error Code

Artur.Kosakowski — Mon, 02 Oct 2017 10:04:12 GMT

Hi @Anonymous

Could you attach your model?

Re: Snow/Wind Error Code

Anonymous — Mon, 02 Oct 2017 10:09:30 GMT

Please find the attached model

Re: Snow/Wind Error Code

Artur.Kosakowski — Mon, 02 Oct 2017 10:14:00 GMT

Hi @Anonymous

The climatic load generator is intended for typical warehouse like structures and is not able to generate loads for bridges.

If you find your post answered press the Accept as Solution button please. This will help other users to find solutions much faster. Thank you.

Re: Snow/Wind Error Code

Anonymous — Mon, 02 Oct 2017 10:16:45 GMT

In that case is there anyway to apply a horizontal live load which would represent the wind/snow load

Re: Snow/Wind Error Code

Artur.Kosakowski — Mon, 02 Oct 2017 10:21:36 GMT

HI @Anonymous

You can always apply nodal or bar loads representing wind load manually however I'd say that it may more adverse effect if acting in the direction perpendicular t the bridge (3D model required).

If you find your post answered press the Accept as Solution button please. This will help other users to find solutions much faster. Thank you.

Re: Snow/Wind Error Code

Anonymous — Wed, 04 Oct 2017 11:09:22 GMT

Hi @Artur.Kosakowski

Thanks for your help

How do i then add a lateral load representing wind in the perpendicular direction to the bridge

thanks

Re: Snow/Wind Error Code

Artur.Kosakowski — Wed, 04 Oct 2017 12:52:20 GMT

Hi @Anonymous

After you change model type (Geometry > Structure type) to the 3D Frame you will be able to define loads acting in the global Y direction which is perpendicular to the bridge.

If you find your post answered press the Accept as Solution button please. This will help other users to find solutions much faster. Thank you.