topic Re: place beam in Robot Structural Analysis Forum

place beam

luismrf — Mon, 12 Feb 2024 16:58:29 GMT

hello i need to place a beam in this location is there a easy way to do it?

i cant do it because i can´t get the intersection point between the grid and the tranversal beam.

Re: place beam

Simau — Mon, 12 Feb 2024 18:18:46 GMT

Hi @luismrf

Tools > snap settings> select only structural axes

Select beams 467 487 502

Edit > Cut by plane

Re: place beam

luismrf — Wed, 14 Feb 2024 15:29:39 GMT

thank you @Simau ,

could you help me in this cantiliver slab i get very high value of reinforcement in these point this means that i have to put this amount of reinforcement or i can put a lower value?

Re: place beam

Simau — Wed, 14 Feb 2024 17:26:58 GMT

Hi @luismrf

Re: place beam

luismrf — Thu, 15 Feb 2024 15:46:04 GMT

Hello @Simau ,

thank you i tryed to do you recommended but i got a error warning:

If the slab is laje 15_diryy why the main reinforcemewnt i get is in the xx direction?

Re: place beam

Simau — Thu, 15 Feb 2024 17:33:33 GMT

@luismrf

You have changed slab thickness to orthotropic " Laje 15.1 diryy" , leave them as before as Laje escadas.

Reinforement type is set as Lajes_V2, in which main reinforcement (Ax) is // to Y global axis