topic Re: Sheet pile wall design in Robot Structural Analysis Forum

Sheet pile wall design

mathias_peron — Mon, 30 Jul 2018 13:37:06 GMT

HI,

Has anyone ever tried to analyse a sheet pile wall with Robot?

Have a good day,

Mathias.

Re: Sheet pile wall design

Mouhammad_mazzaz — Wed, 01 Aug 2018 17:17:37 GMT

Hello, @mathias_peron
you can see these link it may be helpful 🙂
https://www.youtube.com/watch?v=cNzy1SJTsGg
https://www.youtube.com/watch?v=fMqcW3Zj7GU

If I managed to answer your question(s) press the Accept as Solution button please. This will help other users to find solution(s) much faster. Thank you.

Re: Sheet pile wall design

mathias_peron — Thu, 02 Aug 2018 13:53:52 GMT

Hi mmlovemtk,

Thank you for your answer but I'm looking to model something like this (see attached).

Has anyone ever done something similar with Robot?

Re: Sheet pile wall design

DennisVDijk — Thu, 02 Aug 2018 14:27:03 GMT

Hello,

is it possible to show what you want to model?

I have some expirance with sheet piles use ase bearing piles.

Re: Sheet pile wall design

mathias_peron — Thu, 02 Aug 2018 14:31:47 GMT

Please see attached.

Re: Sheet pile wall design

DennisVDijk — Thu, 02 Aug 2018 14:33:16 GMT

nothing attached?

Re: Sheet pile wall design

mathias_peron — Thu, 02 Aug 2018 14:39:17 GMT

Sorry.

Re: Sheet pile wall design

Rafacascudo — Thu, 02 Aug 2018 15:35:48 GMT

Use frame 2d structure type.

Sheet pile as a regular bar with a section of 1m width , so you get the results /meter

use bar elastic ground from Geometry/additional atributes.

2 types of ground

1-where there is soil on both sides , divide the pile bar and set the spring value and assign to the corresponding bar lenght

2- upper part with soil on one side only , the same , but use the uplift on the correct direction on the unidirectional tab.

Apply the soil loads on each side .

Also apply a vertical support on the pile base to avoid instability warnings

Re: Sheet pile wall design

mathias_peron — Thu, 02 Aug 2018 15:51:54 GMT

Thank you, that might do 🙂

Re: Sheet pile wall design

Mouhammad_mazzaz — Thu, 02 Aug 2018 17:47:26 GMT

Hello , @mathias_peron
I would suggest to use this software it will give you best result
and as @Rafacascudo mention that you could do it in robot
but i still preferred to do it with a software that is interested in this field
you can add a construction stage with it and it very easy to use
the soft name is Deep Excavation Software

https://www.deepexcavation.com/en/deepxcav-2011

(see attached)