topic Re: Internal forces in Robot Structural Analysis Forum

Internal forces

ledinhchinh0409 — Thu, 11 Oct 2018 06:22:43 GMT

Hi everybody

I'm looking at how RSA designs the reinforcement.

and

But it looks like the number of reinforcements is not based on the forces calculated

All comments are welcome. Thanks in advance.

Re: Internal forces

Artur.Kosakowski — Thu, 11 Oct 2018 09:53:48 GMT

Hi @ledinhchinh0409

For concrete supports the values of bending are taken from their faces rather than centers. The precision of the bending moment value in the span depends on the number of entered calculation points. You may find watching the 4th Robot webinar helpful for working with RC beam design module:

If I managed to answer your question(s) press the Accept as Solution button please. This will help other users to find solution(s) much faster. Thank you.

Re: Internal forces

ledinhchinh0409 — Thu, 11 Oct 2018 12:02:28 GMT

hi. @Artur.Kosakowski

Thank you. This is quite complicated. I would probably use more manual calculations, then compare the results with RSA.