topic Re: Error settings in Robot Structural Analysis Forum

Error settings

VillHamp — Mon, 05 Jul 2021 19:22:04 GMT

Hello,

I have a problem with the icon of "typical reinforcment" in 2d fotting.

It says its a error, an unknown error. i will add a screen shot.

I tried to delete, detete all folders and reinstall. what can it be?

Best regards,

// Vilhelm

Re: Error settings

Krzysztof_Wasik — Tue, 06 Jul 2021 15:16:08 GMT

Hi @VillHamp

I see that you are using Robot 2022. Have you installed Revit 2022 service pack 1 (HF1)?

Re: Error settings

VillHamp — Tue, 06 Jul 2021 17:35:53 GMT

Hi, thanks for your answer. I have 2022.0.1, and I cant find any newer update. The Robot file however were started directly in Robot.

The error is about not be able to set standard values om concrete and reinforcement in the 2d module.

Best regards,

Vilhelm

Re: Error settings

Krzysztof_Wasik — Tue, 06 Jul 2021 22:12:54 GMT

HI @VillHamp

I understand that you have Revit 2022 HF 1 installed. Problem with Robot might be related to installed HF1 for Revit.

Could you please check if in Robot 2022 Add-Ins menu you have the following options.

If only two positions are available please refer to this Robot Forum thread (message 5).

Re: Error settings

VillHamp — Wed, 07 Jul 2021 08:45:05 GMT

Hello again=), I uninstalled both and reinstalled both, now I have I later revision of revit and it dont work.

I reinstalled revit from download manager, and the file is from april realese date, can i find update of its own, from the WI-mapp folder under c:-Autodesk? Where can I find the not updated revit?

// Vilhelm

Re: Error settings

Krzysztof_Wasik — Wed, 07 Jul 2021 09:13:58 GMT

HI @VillHamp

Not updated Revit 2022 version can be installed from your Autodesk Account

Re: Error settings

VillHamp — Wed, 07 Jul 2021 09:23:39 GMT

Hi, ok thats not the same installation as the desktop app?

I will try that to, I usually download from Manage. autodesk.

//Vilhelm

Re: Error settings

VillHamp — Wed, 07 Jul 2021 09:27:41 GMT

Do I need to delete some folders?

// Vilhelm

Re: Error settings

Krzysztof_Wasik — Wed, 07 Jul 2021 10:30:41 GMT

Hi @VillHamp

I do not think any folders should be removed manually.

Re: Error settings

VillHamp — Wed, 07 Jul 2021 11:08:23 GMT

Do I need Revit 2022 to get Robot to work? I don't have Revit installed yet and Robot still have the same problem.

// Vilhelm

Re: Error settings

Krzysztof_Wasik — Wed, 07 Jul 2021 11:12:08 GMT

Hi @VillHamp

Revit 2022 is not necessary to make Robot 2022 run. Could you check Add-ins menu (see message 4 from this thread) Do you see options presented in screenshot?

Re: Error settings

Krzysztof_Wasik — Wed, 07 Jul 2021 11:13:32 GMT

Hi @VillHamp

One more question. After Revit 2022 uninstall have you uninstalled Robot 2022 and installed it again?

Re: Error settings

VillHamp — Wed, 07 Jul 2021 11:19:47 GMT

Hello, yes I uninstalled revit, then Robot. I installed Robot, still only 2 options. Now revit is done, version 22.0.2.392, from manage.autodesk.com. no additional installations.

// Vilhelm

Re: Error settings

Krzysztof_Wasik — Wed, 07 Jul 2021 11:28:59 GMT

Hi @VillHamp

I am registering your issue in Developers Problem Databases. Ticket number RSA-38366. Since service pack for Robot 2022 will be released, switch back to Robot 2021.

Re: Error settings

VillHamp — Wed, 07 Jul 2021 11:35:16 GMT

Hi, ok thanks. I hade problems some time ago with 2021, integration revit-robot. I ended up reinstall, hard reset, of windows, and wiped it clean... Maby not this time then...=). I have I project running and started, I guess it´s not possibly to go back.

Thanks!

Sincerely,

// Vilhelm

Re: Error settings

VillHamp — Wed, 07 Jul 2021 11:36:38 GMT

But how can the hotfix have a lover number then I have now?

// Vilhelm

Re: Error settings

VillHamp — Wed, 07 Jul 2021 11:57:00 GMT

Hello again, do not care about my last question, I noticed now that hotfix kicks it up to 22.0.10.xyz, thats higer the20.0..2.xyz...

Have a nice day!

// Vilhelm