topic Re: Error message in Robot Structural Analysis Forum

Ordinary round coordinates addin

Konrad.O — Fri, 10 Jan 2025 08:16:14 GMT

WIP

A copy of the archived Ordinary round coordinates addin topic:

http://forums.autodesk.com/t5/Autodesk-Robot-Structural/Error-message-API/m-p/3878461/highlight/true...

Error message (API)

HoshangMustafa — Wed, 24 Apr 2013 08:39:22 GMT

Please find the attached file. What is the eroor and how it is solved? I tried The Edit-Correct command, but it didn't solve the error.

http://we.tl/mWtimotwdF

Re: Error message

Rafal.Gaweda — Tue, 23 Apr 2013 07:38:56 GMT

Diaphragms can be assigned to flat horizontal panels. None of 1264to1266 panels is horizontal

Re: Error message

Rafal.Gaweda — Tue, 23 Apr 2013 07:41:08 GMT

Re: Error message

HoshangMustafa — Tue, 23 Apr 2013 09:15:54 GMT

Thanx Rafal. How can I get this table? It looks ok in the polyline contour dialog. I appreciate if you could help this.

Re: Error message

Rafal.Gaweda — Tue, 23 Apr 2013 10:35:48 GMT

http://forums.autodesk.com/t5/Autodesk-Robot-Structural/Rounding-up-coordinates-API/td-p/3430533/highlight/true/page/4 - first attachment in message 33 - (addin for robot)

Re: Error message

HoshangMustafa — Wed, 24 Apr 2013 07:35:39 GMT

Hi Rafal

Thanx. I appreciate your solutions. Please find the attached files. I changed the walls to panels to reduce calculations and used RoundUpDown_2.exe and ran the calculations but there is still the error. Is there a way to split the walls into two parts according to your suggestions?

http://we.tl/mWtimotwdF

Re: Error message (API)

Rafal.Gaweda — Wed, 24 Apr 2013 08:39:01 GMT

Round Up or Down will not help you because some coordinates of the same panel points are above 1.45 , some below. Use ordinary "round" - addin (attached) This will correct (set correct tolerance before rounding) 1264 1265 but 1266 is not horizontal so it must be calcaulated with Shell calculation model.

BTW why not to use Shell for all of them?

Re: Error message (API)

HoshangMustafa — Sun, 28 Apr 2013 07:15:57 GMT

Hi Rafal

Please find the attached file. Is it ok?

1- soil pressure

2- water pressure

3- modelling of walss, floors, foundations

every thing.

http://we.tl/8SNq2nSEMA

Re: Error message (API)

HoshangMustafa — Mon, 29 Apr 2013 16:01:19 GMT

Please find the attached file. Is it ok?

1- soil pressure

2- water pressure

3- modelling of walss, floors, foundations

every thing.

If the soil had a swelling pressure of about 35kn/m2, how this can be applied?

http://we.tl/8SNq2nSEMA

Re: Error message (API)

Rafal.Gaweda — Tue, 30 Apr 2013 09:31:38 GMT

Check this thread
http://forums.autodesk.com/t5/Autodesk-Robot-Structural/issue-encountered/td-p/3896445

Re: Error message (API)

Rafal.Gaweda — Tue, 30 Apr 2013 10:05:11 GMT

If the soil had a swelling pressure of about 35kn/m2, how this can be applied?

I do not undestand.

New case? Add this load to walls?