topic Re: Material data in Schedules in Revit Structure Forum

Material data in Schedules

matscherYAYGA — Fri, 16 Sep 2022 09:47:59 GMT

Hi I have a question Regarding the schedules in Revit. Im trying to get all elements withing the assembly with the same material into the same schedule. I tryied the Material Takeoff but even when the Rebars have a material asigned it they are missing in the shedule.

I also tried a multy categorie schedule but this is missing the material of elements. Only the Diagonal Material, Upper / Lower Chord material and the diagonal material are available.

Is there a way to get the materials of generic models and Rebars into the same schedule ?

Re: Material data in Schedules

hmunsell — Fri, 16 Sep 2022 12:06:45 GMT

EVERYTHING in Revit is assigned a category and Schedules are Category based. so only the category for the selected schedule will be displayed in the schedule. even material take-off's are based off the Category selected.

Re: Material data in Schedules

matscherYAYGA — Fri, 16 Sep 2022 12:12:13 GMT

But is there a way wo show the material of a family in a Mulit Category Schedule ? And not only the Diagonal Material for example

Re: Material data in Schedules

stefan_gokstorp — Tue, 20 Sep 2022 12:49:27 GMT

Havnt really tried it with rebars bu if you scroll down in the project browser and right click on your assembly. and select matria take off it should take everything included in that particular assembly.

Re: Material data in Schedules

matscherYAYGA — Tue, 20 Sep 2022 12:59:26 GMT

Yes i have tried this and it works fine for everything but the rebars which is a shame. I don't know if this is by design or if I did end up making a mistake

Re: Material data in Schedules

matscherYAYGA — Tue, 20 Sep 2022 13:01:37 GMT

Yes I have tried this and it works fine for everything but the rebars which is a shame . I don't know if this is by design or if I did end up making a mistake

Re: Material data in Schedules

hmunsell — Tue, 20 Sep 2022 13:53:56 GMT

I don't believe so... the Multi-Category schedule is not as Multi-Category as you would hope.

Re: Material data in Schedules

warto1699 — Thu, 29 Jun 2023 10:16:11 GMT

started customizing material takeoff sheets. Is there anyway get cut angles on beams and columns. Like if I mitre them at 45 degrees can I get that show up in material takeoff