topic Inconsistent unit in Revit Structure Forum

Inconsistent unit

dinh.thang.au — Sun, 25 Sep 2022 01:41:28 GMT

Hi everybody,

As the title, I dont know what the problem with below formula.

IF(AND(BBox,r=0mm),r=1mm,IF(AND(RBox,r=0mm,3*t1,r))
Any ideas will be much appreciated. Thanks in advanced.

Re: Inconsistent unit

ToanDN — Sun, 25 Sep 2022 05:31:30 GMT

Is dum_r a number or length parameter? It should be length for the formula to work. If it is a number patameter then you need to neutralize the unit in the to formula by divide each by 1.

Re: Inconsistent unit

dinh.thang.au — Sun, 25 Sep 2022 05:51:55 GMT

@ToanDN Thank you for your reply. Unfortunately it is length parameter. 😞

Re: Inconsistent unit

ToanDN — Sun, 25 Sep 2022 06:44:06 GMT

Can you share the family?

Re: Inconsistent unit

dinh.thang.au — Sun, 25 Sep 2022 07:00:37 GMT

@ToanDN
Thank you for taking time look at my family. It is at the very early stage.

Re: Inconsistent unit

ToanDN — Sun, 25 Sep 2022 07:18:01 GMT

if(and(BBox, r = 0 mm), 1 mm, if(and(RBox, r = 0 mm), 3 * t1, r))

Re: Inconsistent unit

dinh.thang.au — Sun, 25 Sep 2022 07:31:56 GMT

@ToanDN Thank you for quick reply

It seems to be syntax problem since My Pc is also installed Japanese typing.
-Dont beleave others, just ToanDN is enough- Dinh Toan Thang :))