topic Re: Send model from robot to Revit (cladding problem) in Revit Structure Forum

Send model from robot to Revit (cladding problem)

WALIDGIO — Mon, 12 May 2025 18:36:24 GMT

hello
I have problem when updating the model from robot to revit when i updated a panel in robot from cladding to a normal concrete panel the revit will not reconize it , why ?

here the steps
1 send a normal model to robot wit a concrete roof

then change the roof to cladding to exercise some analytical calculation,

when finishI change the cladding to a normal panel since the revit dont reconize cladding

then send back the model to revit with the new panel but here the problem

the roof fis empty ???
I tryed a lot of changes to the panel but none worked

can anyone have explanation to this or can help i'll be appreciated

Re: Send model from robot to Revit (cladding problem)

WALIDGIO — Thu, 15 May 2025 11:48:57 GMT

Anyone can help ?

Re: Send model from robot to Revit (cladding problem)

jay_colc — Thu, 15 May 2025 13:52:06 GMT

Can you share the robot model?

Re: Send model from robot to Revit (cladding problem)

WALIDGIO — Fri, 16 May 2025 08:16:38 GMT

hello,
I did use a simple model created just to show this problem , in a particul model, you cad try it bby creating any model it will have the same problem

Re: Send model from robot to Revit (cladding problem)

jay_colc — Fri, 16 May 2025 08:55:47 GMT

If you just upload it I have exactly what you have and remove any error with translation which will not help solve the issue!

Re: Send model from robot to Revit (cladding problem)

WALIDGIO — Fri, 16 May 2025 09:11:43 GMT

ok here the two model Revit and Robot
the Revit model have analytical wall and floor that have material and thickness
I did send the model to Robot > convert the floor to cladding > then convert it back to normal panel > and here the problem if we make in Revit update the model it will not bring back the floor panel

model attached