topic Betreff: visual styles wireframe in Revit Structure Forum

visual styles wireframe

Anonymous — Wed, 18 Nov 2015 13:51:43 GMT

I created a filter to do the following:

Wall below is shown as solid black lines.
Wall above is shown as solid red lines.
The walls above were masking the wall below to avoid this I set my visual style to "wireframe".

Now some of the lines red lines are being masked by the black lines eventhough the black lines are the walls below. Why?

Betreff: visual styles wireframe

bjoern_teutriene — Mon, 23 Nov 2015 08:09:22 GMT

Unfortunatelly it depends on the drawing sequence. 😞 It may be helps you if you cut your walls to clipboard and paste them alligned to the same place.

Betreff: visual styles wireframe

Anonymous — Mon, 23 Nov 2015 12:20:05 GMT

Yes that's the only solution I came up with also.