topic Re: Revit to IFC classification question in Revit Structure Forum

Revit to IFC classification question

semi — Fri, 16 Feb 2024 07:45:59 GMT

Hi,

I don't know if this is the correct forum for this question but here goes:

When exporting to IFC, some of my information of some geometry is correct, but other geometry with the same export settings aren't.

See this example:

Selecting a beam in Solibri software from an exported revit IFC shows me this:

I can perfectly see my Classification settings, the reference code and the description.

But selecting and other beam of the same category shows me this:

Steel columns also wrong:

Floors are all ok:

I don't get the logic behind this. If it were all wrong I would suggest it's a configuration error, but some data goes out perfectly so I have no idea what's wrong.

The revit settings are always the same:

Any tips guys?

Re: Revit to IFC classification question

ChandanSutradhar — Thu, 29 Feb 2024 05:50:45 GMT

I think you have only one problem Column and other beams do not show the classification name. I would suggest just reassigning the column and other beam classification/assembly codes and checking the export once again. Let me know your thoughts and further input to Assist you.

Thank You,

Chandan

Re: Revit to IFC classification question

semi — Thu, 29 Feb 2024 07:17:07 GMT

Thanks for your reply. What should I reassign my column to? These are the settings of the columns: