topic Re: Cutting and joining columns with sloped beams in Revit Structure Forum

Cutting and joining columns with sloped beams

Anonymous — Mon, 06 Mar 2017 23:23:16 GMT

Hi guys,

I'm trying to cut a sloped beam with a column (concrete). I tried to join, cut and cope but I'm having some difficult.

The only way I got this is using a reference plane to cut the beam on the face of the column. As you can see at the image attached.

Anyone have some thoughts about this? Thank you!

Re: Cutting and joining columns with sloped beams

dipak.chougale7 — Tue, 07 Mar 2017 05:52:15 GMT

check structural material of beam and column it should be same.

Re: Cutting and joining columns with sloped beams

Anonymous — Tue, 07 Mar 2017 12:13:29 GMT

It's the same material, I checked before...

Re: Cutting and joining columns with sloped beams

Anonymous — Tue, 07 Mar 2017 12:26:26 GMT

I figure out what has happened. It was a problem with the family I was using. The material in columns is a type parameter and the beams have the material as an instance parameter.

I don't know why, but this way the they can't join. I don't know if this the only issue, but I changed the family and now its working.