topic Structural Steel Shop Drawings issue in Revit Structure Forum

Structural Steel Shop Drawings issue

Anonymous — Thu, 08 Mar 2018 09:23:25 GMT

Hi All,

I have a problem,when I make section or level for printing but... the line for the main beam is shown as continuous even the secondary beams are above the mean beam, I tried to make it cut under the secondary beams but it doesn't work.

any one can help?

Re: Structural Steel Shop Drawings issue

MostafaElashmawy — Thu, 08 Mar 2018 10:48:51 GMT

Actually what you see is hidden lines (dotted lines) but the problem is that the dots are too large in the used scale.

make the scale of the view 1:1 and you'll understand what I mean.

the solution could be to change the line pattern for hidden lines of structural framing or to just hide the hidden lines in view.

check below photos.

Re: Structural Steel Shop Drawings issue

Anonymous — Sat, 10 Mar 2018 06:59:58 GMT

Dear Mr.Mostafa ,

I make as you said and it is working, also there is option in the properties it's also useful for visibility of hidden lines as the photo.

Thanks Mostafa for your help.

Regards

Eng.Mohamad Jafa

Structural Engineer

eng.mohamad.jafa@hotmail.com